How much oil does a isuzu bighorn v6 take? - 1995 Isuzu Trooper

www.fixya.com/cars/t3327109-isuzu_bighorn_automatic_transmission

5 answers
Nov 1, 2009 - Hi, i have got Isuzu Bighorn 3.1D 1993 model. ... When it slips it cant move even if yourave up the engine or even you you put in D1,D2,L.. ... Not check levels first. ... oil gets to hot and it also raises the heat-gauge, engine runs to hot. .... permission from Fixya Ltd. © 2005-2015, Fixya, Ltd. or it's affiliates. My 3.1 diesel Isuzu bighorn automatic transmission
11 answers
Jun 6, 2016
How to check transmission fluid on 2001 isuzu rode
2 answers
Nov 18, 2008
More results from www.fixya.com

ok did you look at the color of the fluid? if you fluid is some what dark the clutches for the reverse maybe burn out or the reverse ban may be broken so if i was you i would take it to the professionals ok

Have you checked the trans oil level correctly when hot? If its OK then you need a trans specialist to carry out various tests with gauges etc

If you have an oil leak, check your PCV valve

i got same problem with this ..anybody settled??

The cause of oil leakage to the plags through oilseal

if you use the wrong oil viscosity will have trouble starting isuzu
oil switch in them has to have pressure up before she will open solenoid let fuel in
make sure proper oil was fitted

hi if it is an automatic you need to use dexron2 for transmision, if it is a manual you need 10w30 and for the diff 80w90 for the rear hope this helped

Change your gearbox oil, and clean out the oil strainer.
Should help.

( On some models, you have to remove the gearbox oil pan to clean the strainer )

I have a 1998 Bighorn 3.0L if the wrong grade of oil is used in the motor it miss fires and runs rough, due to the injectors being oil pressure controlled, I have heard of extreme cases causing a failure to start when cold. good luck