Check engine light flashes in daytime
SOURCE: how to reset the check engine light on a 2005
remove the battery terminals for about 15 mins, that will reset your computer, if you turn it back on and get the same check engine light there is an underlying problem, only certain codes will trigger that light to come on, you'll need to take it to a mech to be sorted sorry to say, hope all goes well for you, matt
SOURCE: Rough idle
I had the same exact problem on my 2004 Colorado (3.5L). Cleaned the MAF sensor (with MAF sensor cleaner) and throttle body/plate - cleared it right up.
SOURCE: 2005chevy colorado check engine light on code code
This is an EVAP system code. There is a good chance that you just didn't put your gas cap on tight enough the last time you got gas. Check your gas cap and make sure it clicks at least two times after tightening it. If after doing this and driving for a while, the code doesn't go away, you will need to have further diagnosis done as another component in the evaporative emissions control system could have failed.
SOURCE: 2006 chevy colorado check engine light came on
To many things that can cause the check engine light to come on. It could be as simple as a bad gas cap to a miss fire in your ignition system.
If there is an Auto Zone around your area, they scan for the DTC codes free of charge and when the issue has been addressed. The check engine light will reset if self after 3 consecutive start cycle if there is no oter issues.
Thank you for using fixya and good luck
265 views
Usually answered in minutes!
×