I am adding led turn signals to my 94 Dodge ram 2500. How or where can I splice in to JUST THE BLINKER?? don't want the yellow lights coming on when I hit the brakes or have lights on.

SOURCE: 94 Toyota 4-Runner Turn signal /Blinker system promblem

you have a back break light out

SOURCE: 2002 Dodge Ram 2500 4x4 Brake & ABS lights stay on

I would still be suspect of the ABS module. Had the same thing happen on an 01 Tahoe.

Search the web for an ABS repair facility located in Russia, IA. They repair the module for $150.00 and give a 5 year warranty, which you can't get from the factory.
And, their website has troubleshooting guides to help you determine if for certain the module is bad or has a probelm.

You can remove the module and continue to drive the vehicle. Their turn around is as they state, and once I had them make the repiars, my Tahoe has been up and running great!

SOURCE: 2003 Dodge Ram 2500 diesel 4x4 wiring diagram

TPIM PROBLEM , MUST HAVE COMPUTER FLASHED AT DEALERSHIP

SOURCE: 2001 dodge ram 2500 abs light stays on and soo doe

I had the same problem and it turned out to be one of the front speed sensors and the rear speed sensor as well. If you get a chance to look at all the speed sensors make sure the wires on the front aren't burnt from hot brakes. I have an 01 3500 4X4 and it was a pain to change the front sensor but the rear sensor took about 5-10 minutes, it's located in the middle of of the rear axle right on top. I bought both of mine on Ebay and cut the price in half.

SOURCE: dodge 2500 ram diesel no tail lights and my abs

replaced the IPM (the fuse box) it was shorted