We have ordered the car seat gap multi. organizers for both sides and we only get the right side. we still haven't received the order for the left side that was to be here the 25th of Sept. thanks

SOURCE: 1996 Volvo 960, Driver's motorized seat stuck

maybe you got pennies money stuck in the track if not you got 1 motor for that the motor goes in a assembly in there you have 2 cable a left and a right lock under the seat you probably got the right cale disconnect sometime there stuff that push under the seat and push that cable off if its that just push the cable back in let me know and please if you can take the time to rate this thank you pierre
p.s when you try to put the cable back in dont force to mush
PIERRE

SOURCE: 1995 BMW 525i seat height motor works on one side of seat only

there are 2 cables that come out of the motor that operates that feture. Over time the outsdie tube of the cable streaches, causing the cable that turns inside, to come out of the transmission is drives. One way to fix this is to remove this cable and shoren the outside tube by cutting it, and then re-insall back into the transmission. This is a 50/50 chance repair. The correct way to cure this issue is to replace the lower seat frame. $$$

SOURCE: Driver's seat unable to move forward or backward

There are plastic gears connecting the track to the seat assembly. Whne one of these strip the seat will only work or move to one side. Infiniti does not sell a simple fix. You are looking at buying an entire seat assembly complete with the module for all the electronics. It will be at a cost of around $950 - $1000. Once that is in, Infiniti must program the seat to the brain of the car, only then can you reset your memory settings.

SOURCE: remove rear seat lexus es300 2008

the bottom of the rear seat pulls straight up at the front and out. its pretty tight, you need to pull very firmly.

SOURCE: 2007 Tahoe 3rd row right seat will not fold

I solved the problem by spraying WD40 into the front side of the seat support that was sticking. This support has a rubber closure to protect the mechanics of the seat. After spraying a generous amount of WD40, I waited about 5 minutes and tried the lever to fold the seat. It worked and still does.