These are nice as there is a removable cover/ port in the rear trunk on these models.This eliminates the need to drop the tank. This access plate gives you direct access to the pump/sender unit in the fuel tanks top side.
SOURCE: 1990 subaru legacy/Fuel pump
subaru provided a access port in the truck of the vehicle where a round plate can be removed to access unit. tank removal not neccessary. recomend replacing with factory oem part from dealer for best results.
SOURCE: how to replace fuel pump on 96 subaru legacy
the fuel pump is located in the fuel tank, that tank must be pulled to do this. the procedure for removing the tank and pump are very little changed from car to car, here are a good set of general instructions with photos.
http://www.aa1car.com/library/fuel_pump_replace.htm
SOURCE: How do you replace the fuel pump in 1992 2wd Subaru Legacy Wagon
SOURCE: how to remove rear seat of legacy gt 2005
We have the 05 2.5i with cloth interior. Here is your answer which I'm quoting from the LEGACYGT.COM web site: "at the front of the seat, pull up towards the ceiling, then forward"......Here is the web address of the relevant thread/posts: http://legacygt.com/forums/showthread.php?t=13578
SOURCE: why is my 1996 subaru legacy not getting fuel?
but if you have no fuel pressure it wont start. Spray some quick start. If it starts then you need to test for fuel pressure. If none or low, replace fuel pump.
2,168 views
Usually answered in minutes!
×