No tools required. the headlamp is actually held in by a wire clasp with tension. Open the hood and reach behind the bulb and take off the cord that connects to the bulb. Remove the black rubber protector. It should just pull off. Next look for a wire clasp, look for the loop, just push in and and up and it should release the tension on the bulb. Remove the bulb and note how you took it out. If you look at the plug end of the light, there are 3 leads. Mine came out with the middle lead at the top. Carefully remove the new bulb from the packaging and insert into in the head light, in same way you pulled it out. Be careful not to touch the glass. The oil on your hands can decrease the lifespan of the bulb. Re-attach the wire clasp; just push it back in, you may have to wiggle it a bit to seat it. Next, re-attach the rubber protector, then plug it back in.
112 views
Usually answered in minutes!
Do you mean the buld, or the whole headlight?
×