SOURCE: NEED DIAGRAM OF 2003 CHEVY SILVERADO TRUCK EXT
fuel pump is on the engine or either in the gastank follow the fuel line chevys are the easiest auto to work on a new i think yours is in your tank remove both straps and remove hose to filler neck. the fuel **** is in the center of th tank removed by a lock washer system holding the pump in also be careful that you follow the fuel lines though and that you remove bolts that hold the fuel ine to the frame and up to the engine or fuel filter then engine an up to the carb that way you can lower tank without bending fuel line any way however you took it off put it back if a human put this thing together then a human can fix it
SOURCE: replacing pcv valve
driver side valve cover in the back of the cover. if it even has one, sometimes the cover has been replaced with a later style that uses a baffle instead of a pcv
SOURCE: where does electric trailer brake harness plug into under dash
You have to go to the dealer and purchase a harness that will plug in by the fusebox underneath the driverside dash. From there you can wire in your electric brakes
SOURCE: 2000 Chevy Silverado 2500 6.0 litre fuel pump
lifting the truck bed off the frame works best if you dont have a lift..take the fuel neck loose from bed and remove bolts holding bed to frame from the drivers side..loosen the bolts on passenger side..raise the bed on drivers side while watching bumper to bed clearance on passenger side.. you should get enough clearance to remove fuel pump from tank
SOURCE: how about advise on a 2003 chevy silverado 2500 hd
The instructions are below. Also, there will be a diagram for the routing.
To install:
121 views
Usually answered in minutes!
×