Replaced neutral safety switch. Stuck in 3rd gear and doesn't move
SOURCE: Fiat Multipla 2002
In all these cases it appear to be a problem with the synchronizers or a dented pinion. To verify, the oil can be check for metal deposits. Fiats have bronze synchronizers and when placed under heavy shifting load they were out rapidly. if this is the case replacement is the solution and transmission has to be open. The car can be driven but gear will keep releasing. Sometimes the synchronizer level bends causing an incomplete setting off the gear.
SOURCE: have an INTERMITTENT neutral safety switch problem
not sure it the switch,more like the ECU thats controling the box
SOURCE: Gear stuck in neutral
check linkage bars from shifter to transmission you will find 2 of them generally what happens is that the ball or pivot gets worn and ends up falling off.
SOURCE: vehicle wont change up into gear reverse gear not
P0734 - 4th gear incorrect ratio. P1529 Malfunction Indicator Lamp Request. Problem is in the transmission.
Take/Tow your vehicle to an authorized Hyundai dealership and pay the diagnostic fee... they will tell you exactly what the problem is and the cost of parts/labor to fix it... at least this way you'll know what the problem is and what's required to fix it.
Yes this would be a transmission neutral safety switch problem. the switch sit over the post that the shift cable attaches to on the ****** case. Picture below.
82 views
Usually answered in minutes!
×