What does ESP BAS on a 2005 Chrysler 300 mean

SOURCE: the esp bas light is

Hi, that light comes on when the abs computer detects a malfunction and sets a code. You may try removing battery cables and touching them together, if that does not work, you will definitely need to have the system tested with a scan tool.

ZJ Limited

• 17989 Answers
• Posted on Aug 23, 2012

SOURCE: 2005 chrysler 300 esp bas light on and it make it loose power

Hi there:
There are several possible causes, such as a bad wheel speed sensor to a controller locking up. Try asking your dealer about many TSB or Repair Bulletins out for a computer software flashes.



Keep in mind that you will need visit to Chrysler and they can read the DTC (Diagnostic Trouble Code) stored in the computer and tell exactly where is the problem.


Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using FixYa, have a nice day.

Ted James

• 1615 Answers
• Posted on Dec 08, 2013

SOURCE: I have a chrysler 2006 3.5L. And its always had a

Electronic stability control has a fault

SOURCE: why when i replaced ball joints and tie rods on my chrysler 300 touring 2005 my esp/bas light came on. why

Most likely a broken wire to the wheel sensors.