Hi, I need to know the firing order on a Mazda mx6 92 kl series 2.5 doc v6 full Japanese import to Australia.

SOURCE: 1987 Mazda P/U 2-2 cu in engine distributaor & plug firing orde

check this out http://www.autozone.com/shopping/repairGuide.htm?pageId=0900c1528007698a

SOURCE: 99 mazda 626 v6 firing order

• A missfire could be alot of things. If its "pulling a code" then its probably not spark plugs or plug wires. Most of the time it will be a coil or crankshaft/camshaft position sensor. If its a little miss then it could be a dirty injector where only some fuel is getting through. If the injector plugs are easy to access i would unplug #3 while its running. If there is no change, its probably a spark issue and would bring your coil in to autozone or anywhere that can test it. If its good, get the crank/camshaft sensor tested. If the idle gets a little rougher when you unplug #3, it could be a plugged injector
  

SOURCE: WHAT ISTHE FIRING ORDER OF MAZDA MAZDA 2.5L KL ENGINE(V6)1993

See attached diagram....

SOURCE: need the firing order for 1993 mazda lantis 2litre v6

Hi Heiko:
I Googled your question. Here is the link that contains the results.
Hoefully you will find your answer.
https://www.google.ca/#q=firing+order+in+a+1993+mazda+lantis+2+litre+v6+engine
Cheers

jack layton

• 5569 Answers
• Posted on Apr 12, 2017

SOURCE: Does anyone know the exact firing order for a 2002 Pontiac firebird v6 3800 series 2 engine and why the car stalls at idle

Firebird 3.8L, vin K, firing order shows to be 165432.
How long since a tune-up? Any applicable trouble codes? Check and clean idle air system.