Https://www.autoblog.com/2016/03/28/p0088-obd-ii-trouble-code-fuel-rail-system-pressure-too-high/
Has to do with the fuel pressure. Here is how to change the sensor:
SOURCE: water pump replacement procedure 2005 2500 dodge with cummins diesel
take off old water pump. clean up area on the motor real good.do this by using a scrapper and cleaning slolvent. when thats all done put hi temp silicon on the block water pump and the put gasket on silicon. let dry for like five minutes. put in on torque bolts to specs.
SOURCE: Changing front ball joints on Dodge 2500 2005
can it not be done without removing the hub ?? dont think you can get hub off without removing the track control ball joint?do you have the right tools??
SOURCE: where is oil pressure sensor located on 2001 dodge 2500 cummins?
Hello mhak330: My name is Roger and I can give you the answer to your question. Locate the ECM on the drivers side of the engine.look for the bottom bolt holding the ECM. To the right of the bolt you should see the oil pressure sender unit. Should you need further help please just ask. Please rate the quality of your answer. This way we know you received helpful information. Thank You for using Fix Ya. Roger
SOURCE: Trouble code P1740 on 1999 Dodge Ram 2500
I had the same code on my 2001 dodge 2500. The truck wouldn't shift from 3-4. I pulled the trans pan off and replaced a broken spring ($2.00). It is behind a thin plate with 3-4 small torq screws. You don't have to remove the valvebody. Only took me 45 minutes to fix.
I would like to give thanks to Jeff Russel from Teal automotive. He said this is a very common problem. He sells any part for any automatic Transmision and his prices are very affordable.
Here is a link to the website.
http://www.tealautomotiveinc.com/
Hope this helps.
SOURCE: Where is the fuel filter located on a 2006 Dodge
It is located on the driver's side of the engine. You will see a yellow handle for the fuel/water separator drain valve at the bottom of the filter housing. The black plastic top unscrews and the filter can be pulled out.
1,250 views
Usually answered in minutes!
×