If the break light is gone will this bring up the abs light

If a wire was broken replacing the reluctor ring, this would be the ABS light. Not the brake light. Check the brake fluid, check the E brake pedal/handle. The rings do break, I just weld them back in place. If they are gone, it gets a new axle.

Abs sensors are not located on breaks, there is a control modgal that your break lines all connect to close to the booster. An abs sensor is located on the axel or wheel hub. Some cars do have sensors in the break pads but they are not related to abs. Some cars are equipped with abs computers and don't have the hardware, unplugging that fuse might prevent the abs light on your dash from coming on or make it stay on and either will prevent the vehicle from passing inspections and if you haven't a background in any kind of maintenance I suggest you bring it to a mechanic or a friend with experience if your having problems.

find out why it is on first.

Most likely yu cause a problem with the abs system since the stability control uses this system it will also illuminate when there is an ABS issue. If there where not a problem the light would have gone out. Since the light remains on we now something is wrong. Doyle check your work making sure you didn't accidentally unplug, break, or pull the wires out of a sensor. If nothing looks wrong than your next step is to check for ABS codes with a scan tool.

I’m happy to assist further over the phone at https://www.6ya.com/expert/jeremy_d728a59f986299fa

bring to gm dealer they may need to flash the module

your gonna have to bring it to a mechanic no telling how much damage has been done

your traction control mechanism uses the abs breaks to slow the spinning and give you better traction. i'm thinking your traction control sensor has gone bad

u get what you pay four sound to me like you need braks

go get a second inspection!!! diagnosis elswhere
is there a ABS light on in the dashboarrd??
or any noises or weird braking happening?
if not then id never go back to those guys!
they may just need cleaning due to road grime! & brake dust buildup!
Cheers Rob

operating errors in your ABS modulator. May be an issue with an ABS sensor. Get Vag-Com programme to interact with computer to solve. Or bring to Main dealer as you've got a reduced braking capability right now