My 2003 saturn s13 key or automatic trunk release wont work.
Usually the trunk lock mechanism draws enough voltage that it will have it's own Fuse. I would check that first before anything else. Most ALL my experience has found that the Fuse was burnt (an acceptable occurrence) usually from being harder to release from age and a need for some Lithium grease on the mechanism on the trunk assembly. I would check all the mechanical and electrical (Fuse) in the car before giving up and taking it to a shop. Many times, it can be fixed easily and more cheap than what you might think. Hope this helps.
SOURCE: Trunk release will not work, but I can open it with my key
inside the trunk near the latch is a switch that kills the trunk remote
SOURCE: trunk release and fuel door release buttons do not work
i just bot mazda millenia and i can't find trunk release???!!!!
SOURCE: Mercedes-Benz 320clk coupe 2002 with dead battery
Posotive can be found in hood driver side next to fuse box. It is a small rectangle box. You can hook negative to any solid ground on the car.
SOURCE: 2003 saturn ion-release does not work for trunk release
If only the trunk release is not working, did you check to see if the little lever arm switch on the trunk lid at the latch assembly is switched to enable the release? Mine came switched to the 'Off' position when I bought it and it took me a few days to figure that one out.
SOURCE: TRUNK WONT OPEN WITH TRUNK RELEASE BUTTON ON DASH OR WITH REMOTE
Check for broken wires running from the body to the trunk lid through the rubber boot.When the trunk is closing you can see the kink in the rubber boot.There are 11 wires to supply 1 solenoid so I think Chrysler knew there was problem.
95 views
Usually answered in minutes!
×