Try this. I hope it helps you, Take care.
Testimonial: "Try what?"
I sent you a pic. I’ll try again let me know if it comes through I think you have to click on it.
It keeps deleting when I hit send
Sorry, what do you need to know maybe I can help, I've done hundreds of these carbs
Thanks now I’m trying to find the correct repair kit for the carter carb. 7502S any help would be appreciated.
That carb is so common that almost any parts store should have it in stock. It will come with a lot of gaskets you don't need because it fits many different applications of the same carb. Be careful to match the base to carb body gasket because there are many in the kit that are close then make sure you get it in with the correct side up. Also use loctite on the base to body screws. They may have been loose when you took it apart. I’m here if I can be of any more help.
×
SOURCE: fuse box diagram 1984 F-150
I regularly use the local library. They have repair manuals that you can check out. Also have electrical wiring diagram books for foreign and domestic that you can make a copy of to take home.
SOURCE: I HAVE A 1992 FORD F-150 AND I NEED A DIAGRAM TO WIRE IT?
Do you mean plug wires? there is a diagram on the front of your truck near the radiator that tells your fireing order you read it counter clock wise and your spark plug numbers is from front looking to the back left side #1 #2 #3and #4 right side is #5 #6 #7 And #8 is your motor a 5.0 v-8?
SOURCE: My 1984 Ford F-150 V8 302 choke is not working?
Your choke should have a spring at the bottom under a little cover with a rod coming up and connecting to the butterfly for the choke. Usually this get a little corroded and sticks, you need to clean the pieces so that they rotate freely and the rod will move up and down. It is adjusted on some models by bending the rod to make it longer or shorter. When you push down the gas pedal for the first time in the morning it should set the choke, test this by opening the throttle while its cold out, once the throttle is opened the choke should close, once the engine is running there is a vacuum operated linkage that should pull it back some, until the engine is warm. Again if this worked before, its probably dirty so a good cleaning is in order. Hope this helps, let me know
SOURCE: need a clear diagram picture of metering rod and
should give you details in the haynes manual
SOURCE: need schematics or diagram of fuse box 1990 ford f150
my email is [email protected] and i have a 1991 f150 so the fuse boxes should be the same so i will take a pic of it and send it to you
325 views
Usually answered in minutes!
×