I have gone all the way up to 30 amp fuse and still blow the fuse it will run for a while then it will blowI have gone all the way up to 30 amp fuse and still blow the fuse it will run for a while then it will blow
You can't post conmments that contain an email address.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
There are two fuses for the fuel pump relay. One fuse is load side of relay, that fuse also sends voltage to load side of asd relay, the asd relay sends voltage to several systems, two of which are the fuel injectors and ignition coil. I'm not telling you to replace, anything, but, you need to do some testing.
The other fuse goes to control side of relay, smaller amp fuse. I don't know the amp rating of the fuse that keeps blowing.
See that fuse, it supplies voltage to load side of fuel pump relay and also to asd relay.
You can. Try a Chilton's manual or the how to books sold at auto parts stores. The starter solenoid wire goes directly to the ignition switch The fuse marked IGN controls power to the starter solenoid.
Fuse number 13 is a 20amp fuse that powers the ASD relay and the computer among other things. Someone will have to pull the relay and check the circuits one by one to find the short. It could be any one of a dozen or more components.
More than likely you have an internal fault either in the fan itself or the thermostat that activates it.
For a fuse to blow it has to have a lot higher than normal current draw through it, which is normally refered to as a short. If the fuse blows almost immediately then I would suggest you unplug the fan, and see if the fuse blows with just the thermostat in the circuit. If it blows - replace the thermostat control. If it doesn't blow, plug in the fan and watch it. If it trys to start and then blows the fuse, replace the fan motor.
Too much combination of voltage/current. Fuses are to keep things from
over-heating/catching fire. If you replace that fuse with a larger one,
it won't blow as often, but it defeats the purpose of the original
fuse, which is to limit your voltage/current.
I have gone all the way up to 30 amp fuse and still blow the fuse it will run for a while then it will blow
×