ROVER 200 HEATED REAR SCREEN PROBLEM. NOT LAND ROVER. I have a problem with the heated rear windscreen on a Rover 200, i have checked the switch, relay and fuses in the main fusebox (under the steering colum) and in the engine bay. According to the Hanyes manual there is another 20A fuse which feeds the relay, can you tell me where this fuse is located as i can't see any more fuses anywhere. thanks.
SOURCE: how do i remove an alternator from a land rover
you will need to remove the under engine protection cover ,2 bolts at front 2 at back. or remove the inner wheel protection cover 3 screws.easier from underneath.
SOURCE: On a land rover discovery, windscreen wiper motor,
Ok, here are the wiring colors and functions/destinations. C0030 is the motor connector for the front windscreen.
C0030-1 - Black, runs to a Earth
C0030-2 - White/Green - Fed from the front wiper relay, via the IDM
C0030-3 - Blue/Green - Flick Wipe/Fast Wipe
C0030-4 - Green/SlateGrey - Power from Aux Relay
C0030-5 - Red/Green - Looks to be a speed control connection.
It's hard to tell to be honest, you'd really need to sit down with RAVE and the electrical circuit diagram and the operation description to make head or tail of it.
SOURCE: 2009 Land Rover Discovery and Blackberry Curve 8900
You'll have to call the dealer have them pull the VIN to see if you have the latest and greatest software. Also you can check on the land rover website under owners put in the last 8 digits of your vin number and it will tell you if the BB8900 is fully compatible.
444 views
Usually answered in minutes!
×