At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Check fuse first, or it's a ground problem somewhere try new ground wire at interor light and on at brake light , regound them right at the problems to steel
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
These are all different circuits. The brake lights are on a 10amp fuse - the headlights are on a 50amp fuse - and the parking and dash lights are on a 20amp fuse. Do you have power going into the headlight switch and the brake light switch ?
you may check the preeure sensor on the master cylinder. Also, if the switch for the parking brake is stuck closed, or if the ABS speed sensor or monule have failed, it could have cuased these sysptoms. ________________ autocom cdp pro
you mean parking brake cable? loosen parking brake cables put drums on , and adjust shoes till they lightly drag, now apply brakes a few times and check the adjustment again, if all ok, now adjust park brake cables, you want to adjust so park pedal goes 5-8 clicks till the wheels are "locked up" and the wheels spin free with the park brake off
www.wiring-diagram.com
You can get any wiring diagram for any vehicle. It will cost about $12 and it's well worth it. It will give you the complete diagram bumper to bumper.
Check for moisture under the interior carpeting.
I have see it cause this when the wiring gets wet on the connections from the door switches. Other wise you are going to have to get a meter and check all the wiring to each door and the lamp switch.
×