Where can i find a diagram to install serpentine belt on a 1991 chrysler lebaron gtc?
Most parts stores can print this out for you for free.
Chilten's repair book or Haynes' repair book for Chrysler 95 lebaron Usuallya 95 chrysler lebaron is 3.0L Look in the book for diagrams for 3.0L or the engine you have
To find your engine Look under hood Your engine should be on top engine cover My guess is it is a3.0L
what confuses most is the way the belt loops around the tensioner, the belt goes around the steering pump and crankshaft pulley, under the idler pulley, under the belt tensioner pulley and finally with the tensioner compressed around the alternator. the idler and belt tensioner wheels both get the flat backside of the belt. use your imagination. if you have too much slack, which is the route that will use up the most belt.
the 94' and 95' Chrysler Lebaron are fairly the same in serpentine belt order, although you may find a variation or two
I taped a picture of the belt routing on my firewall to remind myself how to do it. It defies imagination! The trick seems to be the fact that it comes up off the power steering and over the top of the tensioner and all the way back down to the crankshaft pulley. That kind of throws you with the big loop up to the tensioner.
×
Fig. 9: Timing belt routing and timing mark locations
Hope helps (remember to rate this answer).
609 views
Usually answered in minutes!
there is one under the hood.
×