Question about 1996 Chevrolet Suburban
You didn't say what size engine, so here are several links to each diagram...
V8-6.5L Diesel http://www.gates.com/common/part_locator/view_diagram.cfm?id=S7008
V8 7.4L http://www.gates.com/common/part_locator/view_diagram.cfm?id=S8001
Posted on Sep 10, 2009
Go to autozone.com and register for free. It is full free online repair manual
Posted on Sep 09, 2009
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: belt replacement
what i do is draw me a diagram before i take the old belt off you can also ask the auto part store where you get the new belt and for the most part they have a diagram for a long time came on the box with the new belt in it.
Posted on Apr 13, 2009
Ok, Alternators are a breeze on these things. There are two bolts that hold it on, and 2 sets of wires. If you haven't taken anything apart yet, and the belt is still on it, here's what to do. You will want one of those rubber or elastic bungee cords, about 2 and a half feet long(this makes it easy). Hook that bungee cord to your hood somewhere, so that it hangs down. Hook the other end on the serpentine belt right next to the alternator pulley. If you need to prop the hood up with a stick or something to keep it up, do so. Pull up on the belt, and watch the pulleys. The one that probably has a plastic pulley on it that moves up and down(this is the tensioner) is the one that you'll put a deep well socket in the middle of with a ratchet, and turn counterclockwise. This will make the belt go loose. Now you can work the belt off the alternator pulley, and once you get it off, the bungee cord will keep it in place, so you don't have to look at the diagram. Otherwise, if it comes off, there is a sticker just under the hood either on the fan shroud or the radiator support that has the belt diagram. Now, you can disconnect the battery, pull the rubber boot down off the nut and post on the back of the alternator, remove the nut and wire, and then unhook the wire from the side of the alternator. Now, you can remove the two bolts that hold the alternator on. You Will need to pry the alternator off at this point, as it fits really tightly in place. A socket extension or a large flat screwdriver works really well for this. Once you get it off, put the new one on exactly as you took the old one off. Note, you will have to release your tension on the tensioner at some point; i just ease it down, or if I can pull it off, wedge it somewhere where it won't loosen very far. Remember, on the tensioner, you're not trying to take the nut off. All you're doing is using it to move the tensioner arm. That's all there is to this job. Sometimes it can be stubborn with the prying part, especially getting it into place. Hope this is what you're after, and if you need more info, leave a comment for me.
Posted on Feb 22, 2010
Testimonial: "Great advice on the bungee cord!! Well written advide and easy for a novice to follow. Thanks"
Tips for a great answer:
Aug 18, 2010 | 2003 Chevrolet Suburban 1500
May 16, 2010 | 1996 Chevrolet Blazer
Mar 11, 2010 | 1992 Chevrolet Suburban
Jan 17, 2010 | 1996 Chevrolet Cavalier
Jan 10, 2010 | 1998 Chevrolet Cavalier
Sep 09, 2009 | 1996 Chevrolet Suburban
May 05, 2009 | Chevrolet S 10 Cars & Trucks
Mar 08, 2009 | 1991 Chevrolet Suburban
Feb 08, 2009 | 1996 Oldsmobile LSS
963 people viewed this question
Usually answered in minutes!