Where is the keyless remote module located on a 2001 Town Car?

Some idea here

https://www.cargurus.ca/Cars/Discussion-t16152_ds836069

Answered on Fixya before
https://www.fixya.com/cars/t12836438-control_module_located_2003_lincoln

https://www.google.com/search?q=2003+lincoln+town+car+body+control+module+location

..

Video and location images. It is under the dash. Have you checked the bulbs and grounds?

https://www.justanswer.com/ford/1l0w8-procedure-replacing-lighting-control-module-2001.html

The lighting control module is a programmable module on this vehicle. It will take a scanner capable of programming modules. The lighting control module is located under the dash on the drivers side. It is not too hard to replace, except for the programming. You can not program the module without it being in the car either.
1. depress retainer
2. remove screws
3. Lighting control module

More here

https://www.google.com/search?q=1999+lincoln+town+car+lighting+control+module+location

..

It is located in the dash that is the ATC or 4 season control

Great news, you can program a 1994 Lincoln Town Car keyless entry remote yourself! Here are the steps:

NOTICE: You must have all remotes on hand when performing this procedure. Any remotes not used during this procedure will become inactive.
1. Turn ignition to RUN or ACC.
(Run is forward, just shy of starting car.)
2. Momentarily jump pins in programming connector located behind the glove box.
(The connector will have two pins inside of it, and it will not be plugged into anything. Jumping the pins means to make a connection between the metal inside the plug. You can do this by using any metal, a metal paperclip bent in the shape of a "U" usually works perfect.)
All doors will lock then unlock to confirm programming mode.
3. Press any button on first keyless remote. Door locks will cycle to confirm programming.
4. If programming a second keyless remote, press any button on second keyless remote. Door locks will cycle to confirm programming.
5. Turn ignition to OFF. Locks will again cycle to indicate end of programming mode.
You can find more keyless entry remote programming instructions here https://www.keylessentryremotefob.com/Key-Fob-Programming-Instructions-s/1856.htm

There is no external turn signal flasher on a 2001 Town Car. The flasher unit is an internal part of the Lighting Control Module (LCM) and can not be serviced seperately. The LCM is located under the dash to the right of the steering column. It may also be referred to as the MECM (Mutli-Function Electroninc Control Module).

are you talking about door pad keys? If yes, the permanent code is on a plastic card in your owner manual folder and on the module. Your dealer also can retrieve with his scanner for about 1/2 hour labor.

2001 lincoln rides to hard and on dash says ride data error

do you know the factory code? the module is located in the pass side kick panel area the code should be on the module

I have a 1988 Lincoln Mark VII but this still should work.

You first need to enter in the code you have. Then, within five seconds press the 1/2 button. Then, within five seconds of each other, press five buttons in any sequence you desire and this will be your new code. Hope this helps.

Hello
this is how to program the remotes/keyless entry

How

• Obtain all remote transmitters
• enter the 5 digit permanent code into the keyless entry pad on the drivers door
• Press the 1-2 switch on the keyless entry pad
• Within 5 seconds
• Press any button on the first remote transmitter
• The doors should open then lock
• Within 5 seconds
• press any button on the second & third remote
• within 5 seconds for each remote
• to exit programming
• simultanionusly press 7-8 & 9-0 switchs on the key pad or wait more then 7.5 seconds

NOTE
The 5 digit permanent code is located in one of the following places

1. On the owners warranty card
2. On the label on the inside the trunk/ boot
3. On the owners code card
4. On the centrel locking control module located in the drivers door
5. In the PCM ford can get this for about $25.00

I hope this help
Regards Paul
www.limotec.co.uk