Central Locking comes in and out.

Change/repair the central locking motor inside the door.

I want to know what's the fuse number for my window wipers on my 2005 ford explorer

Check fuses first, then check the wiring connections to the buttons. Possible the plugs are corroded and just need to be unplugged, cleaned, and plugged back in.

The alarm and the central locking are all part of the remote keying system. You will not fix it with changing fuses because it is likely the ECU needs to be be reset. Unfortunately, it will require a visit to an authorised workshop to do this

inside the mechanical lock (The part that actualy holds the door shut when you close it) there is a switch that informs the control unit that the lock is either locked or unlocked.
These switches fail sometimes, when this happens the control unit is not aware that you have opened the door, and therefor will not wind the window down slightly.
This is also likely to be the cause of problem # 3 , door will not lock. I fthe faulty switch is not informing the control unit that the door is closed, the central locking will not try to lock the door (because it thinks the door is still open).
The switch is integral with the lock unit, and they are not easy things to replace either.
as for the wipers and engine fault, there could be a number of different possible faults here, would have to be looked at.

there's a fault in it sumwhere

there migth be a blown fuse

if you unlock the doors via key in drivers door do all the doors unlock . if they do you may have a siezed locking unit

this is a similar problem to the one i had, it sounds like the fuse box may be breaking down one by one, usually means a replacement fuse box

I have the same problem - Drivers door windows wing mirrors and drivers door lock not working also air bag light on. The car has been to a BMW specialist for over a week as the drivers door dead locked.
The mechanic used his diagnostic gadget which showed a problem with the drivers door. All other doors windows locks work except drivers door. Has check the power supply to the drivers door switch all ok. Is the problem with this internal window control switch and how does this affect the drivers door lock?
Please Please help