Where is the clutch resevoir for a 94 jeep wrangler yj

Most American-made cars have a fuse box under the dash. Check under dash at driver's side firewall. May have a cover that you will need to open. Also see fuses under hood in area around the steering column.

this is a faulty clutch master cylinder

It should have a safety interlock switch on the clutch to prevent it from cranking with the clutch not depressed. Do a search on the Internet for 94 jeep clutch pedal safety switch. If its an automatic it should have a switch on the transmission linkage to prevent starts out of park.

may have a bad mastercylinder for slave, also did you bleed system good and no leaks,id say master may be the problem or clutch preasure plate is bad .good luck.

your fluid is anti-freeze/coolant leaking from the heater hoses or heater core inside the heater box.check level of coolant in overflow reservoir under hood.

i have a 1988 jeep wrangler 6cyl with 5 speed transmission. I was shifting the jeep and it got stuck in third gear. We opened it up and saw that the linkage is aligned and everything is in place. I dont know what is wrong and what to do next. please help ....

OK I have a yj and you start from the windshield put the snaps/or what ever yours is on the top of the doors then down the side or the doors then under the back side window then around the curve and this is the hardest part then your tailgate also make sure your bars on the inside are loseuntil the top is on then thighting those bars and you should have a nice tight top but belive me it is hard and you might need a flathead screw driver for the corners. Good luck and a jeep wave to you!

check for leak at the push rod for the clutch master under the dash and also the slave cylinder and replact the leaking part

Check the cable operation with the vehicle off, wheels blocked, by having an assistant depress clutch pedal while under the vehicle. If everything appears to be functioning normally, then there may be an internal transmission problem. Does the Jeep hold itself if it is placed in gear, park brake off? Can it be moved while in this state? If it does hold, you may simply have a stretched cable, or a broken or damaged quadrant. The quadrant mounts to the firewall of the vehicle, just in front of the driver, under the dash. This is where the cable connects. Check this, and let me know if it does or doesn't help.

bleeding cluch 96 jeep