406 hdi pass door lock wont lock so car wont lock

I know this sounds weird, but check on the mirror housing( pass. side) it should be located in the mirror.

have heating in my peugeot 406 hdi when car is ticking over but when i drive for few mins the heater goes cold

The ignition key may be defective or in need of a battery to generate the code needed to disarm the immobilizer. Hope this helps!

Hi,just reading with interest" Ianhende's" problem with his 406, I have the same sort of problem with a 2002 406 hdi (110) i.e hazards going off,plus central locking turning on & off whilst driving. have replaced battery, the mechanic is thinking that it is to do with a faulty door lock, any ideas out there ???? [email protected]

sounds like a fault on traction control or abs
check the abs rings on the front drive shafts

i have the same problem.Have u had any luck with urs yet???

switch has broke inside itself

you need to reprogram the fob

Injectors from the same ccm engine are most probably sounds same but to be on the safe side check not only the shape but code on the top of injector too. Because they are piezo effect injectors and set by the manufacture for a specific pressure for specific engine codes.

No, the size of the cars is different, so it wont work.