My tail lights and brake lights stay on even when ignition off

Brett,

Likely it is a brake light that is on. Brake lights can actuate with the ignition off, usually by pressing the brake pedal. Test the lights, brake and turn signal circuits, but my bet is a brake light switch out of adjustment.

Doc

Fix your car right away, by clicking the link
1996 2000 HONDA CIVIC REPAIR MANUAL

Turn signal tail lights and BRAKE LIGHTS NOT WORKING

It can be faulty brake light switch causing the problem or its blown brake light bulb. First check and confirm brake light lamp is working and that's not the case.

For turn signal not working it can be faulty turn signal switch or its issue with wiring:----

==========

To trouble shoot brake and turn signal related problem, check the help links mentioned below:-----

Click the link:----
1996 Buick Regal Grand Sport Brake light Switch Location? http://schematicsdiagram.blogspot.in/2012/04/1996-buick-regal-gran-sport-brake-light.html

-----------
No brake lights on Buick? http://schematicsdiagram.blogspot.in/2012/04/no-brake-lights-on-buick.html

----------
Brake lights not working on 1989 BUICK REGAL?

http://schematicsdiagram.blogspot.in/2012/04/brake-lights-not-working-on-1989-buick.html

-------
How to replace Brake light switch on Chevrolet Tahoe?

http://technoanswers.blogspot.in/2012/02/how-to-replace-brake-light-switch-on.html

---------------
How to replace Parking, turn, and Brake Lights on car?

http://schematicsdiagram.blogspot.com/2011/06/how-to-replace-parking-turn-and-brake.html

----------
Upper brake lights work, but low brake light not working?

http://schematicsdiagram.blogspot.com/2011/12/upper-brake-lights-workbut-low.html

------------
1997 Cadillac Catera: How to replace Brake Light Switch?

http://howtobyme.blogspot.in/2012/06/1997-cadillac-catera-how-to-replace.html

------------

2003 Chevrolet S10 Tail light Fuse http://schematicsdiagram.blogspot.com/2012/11/2003-chevrolet-s10-tail-light-fuse.html

---------
Chevrolet Parking light and Tail lamp light Wiring diagram http://schematicsdiagram.blogspot.com/2012/11/chevrolet-parking-light-and-tail-lamp.html

----------
Car Tail Lights Not Working?

http://schematicsdiagram.blogspot.com/2011/12/car-tail-lights-not-working.html

----------
Turn Signal Not working http://technoanswers.blogspot.com/2012/11/turn-signal-not-working.html

----------
Right turn signal not working on Pontiac Car?

http://schematicsdiagram.blogspot.com/2011/12/right-turn-signal-not-working-on.html

--------
Only one side indicator light working on car?

http://schematicsdiagram.blogspot.com/2011/12/only-one-side-indicator-light-working.html

-----------
Turn signals not working on 1987 Jeep Wagoneer? http://schematicsdiagram.blogspot.com/2011/12/turn-signals-not-working-on-1987-jeep.html

1996 Chrysler LHS brake light circuit wiring diagram?

http://technoanswers.blogspot.in/2012/02/1996-chrysler-lhs-brake-light-circuit.html

----------
How to replace rear Brake lights on 2004 Toyota RAV4? http://schematicsdiagram.blogspot.in/2012/02/how-to-replace-rear-brake-lights-on.html

------------
One brake light on driver side not working, but other lights work?

http://schematicsdiagram.blogspot.com/2011/12/one-brake-light-on-driver-side-not.html

----------
2002 Lincoln Town car Fuse Box http://schematicsdiagram.blogspot.com/2012/11/2002-lincoln-town-car-fuse-box.html 2007 KIA Rio: Brake Light Fuse Box Diagram?

http://repairhelpcenter.blogspot.in/2012/06/2007-kia-rio-brake-light-fuse-box.html

-------------
Overhead Brake lights not working on 1999 GMC Sierra 4x4?

http://technoanswers.blogspot.in/2012/03/overhead-brake-lights-not-working-on.html

---------
2004 Ford Mustang: Brake light Fuse Location?

http://howtobyme.blogspot.in/2012/05/2004-ford-mustang-brake-light-fuse.html

---------

These will help.

Thanks.

if the panel is not damaged or only slightly damaged it should just be a case of removing the damaged tail light and fitting the new one, if all electrics work I would leave the socket

Replace rear brake pads. If that doesn't help, remove the plastic console around the parking brake lever and adjust the pull on the lever. It's probably so loose that it's trigger the light.

This is not normal, looks like someone accidentally drove several miles with the brake on.

It sounds like your brake pedal switch is not working right. Are the lights on all the time, or just when you turn ignition off? If the former, it is bad brake switch. If the latter, you likely have a bad ground located somewhere in the wiring harness.

Most vehicles have the switch located on a small plate next to the brake pedal arm. Follow the pedal up the arm and to the firewall. Along the way you should see a plunger style switch that looks like the one that you bought. It might also be found inside or next to the brake booster under the hood.

check the bulbs first, then the fuse, then the brake light switch

Check this 1st.With the car running,turn on the headlights.If the taillight gets brighter,it's the brakelight that is staying on.Turn the headlights off to see if that then makes it less bright.If so.try lifting the brake pedal up.If the taillights go out,it is the brakelight sensor switch that is hooked up to the brake pedal.This is a small pushswitch,located at the top of the brake pedal in the inside of the car.It will have 2 wires connected to it.It either needs adjusting or is faulty.Hope this helps

not adjusted correctly , sould be able to adjustswitch under hand brake boot

Rear lights are double filament bulbs one side for the lights other side for the brake/turn signals so it still may be a bulb. Do u have a test light or volt meter you can check to make sure u have power there when brakes or turn signals are activated. Or just try another bulb.