At the same time today both my ABS light cam on and the 4wd light starting blinking. It is a 2005 ford escape, 4 cylinder with 39K miles on it and never had any problems so far. Thanks in advance for any help!
Check this page. Very usefull for this problem.
http://www.ford-forums.com/ford-escape/43888-2006-escape-abs-4wd-light.html
Web page I posted one year ago is not working anymore. But basically it's the ring (looks like a gear) right behing the rotor (disc brake), that is broken (cracked) because of rust expanding underneath. Then this ring doen't turn anymore with the wheel, and the sensor can't anymore send the right message to the ABS and/or AWD module. That's why the computer says it's faulty. Common issue on Escapes and Tributes.
Dealer charges around 300-350 canadian dollars to replace 2 in the front.
I cleaned the hub and glue the ring back on with epoxy glue.It only costed a few cents its been over 3 yrs and its still holding.
×
8,667 views
Usually answered in minutes!
×