NEED A WAY TO DISARM THE SECURITY ALARM - 1993 Jeep Grand Cherokee

ask HONDA?

https://honda-tech.com/forums/audio-security-video-27/installation-alarm-security-2way-icbm-7071-a-3102177/

Hi, the Jeep Grand Cherokee 1997 has a security system called VTSS (Vehicle Theft Security System). The VTSS cannot be disabled as it comes factory installed. What you can do is prevent the VTSS alarm from arming. If you prevent it from arming, you will void it activating. One of the VTSS funcions is to also prevent the engine from starting when the alarm is armed. To disarm the alarm do this. Locate a line colored Violet with a black trace in the Body control module connector. In a suitable place of that line, insert a needle and using a jumper wire touch that needle with an extreme while the other extreme is touching ground. This will disarm the VTSS alarm. When the VTSS is disarmed, the engine will start every time you need it to.

Security is built into the key. There is not a way to disarm and allow vehicle to start other than having dealer or other authorized person to program a new key to the car

is this just alarm , and or the immoblizer SKIM problems, why not post the symptoms, or if opr guide missing.
all answers USA spec cars......
all answers STOCK cars, not hacked or with non Jeep parts.

the SKIM can not be defeated.
if still stock is it? with stock alarm. is it?

the fsm is free for 02 TJ
http://www.jeep4x4center.com/knowledge-base/index.htm?utm_source=cj#service

it explains all there. (no chapter on alarm only the IMMO )
chapter 8Q
theft and security chapter.
I attempt to guess your question, how to disable just the door alarms. (not SKIM)

my 02 TJ has no such thing, door alarms at all , mine had rag windows
and and no electric door locks at all, just a key. (mech lock)
not only that, the 02 operators guide has not a word at all about any alarm. period (USA cars)

my 08 JK however has doors with glass windows and all trimmings.
the alarm on my 08 is disabled by these steps.

To Disarm the System
To disarm the system, you will need to press the UNLOCK
button on the RKE transmitter, or turn the ignition
key to the ON position. If something has triggered the
system in your absence, the horn will sound three times
when you unlock the doors. Check the vehicle for tampering.
The Security Alarm System is designed to protect your
vehicle; however, you can create conditions where the
system will arm unexpectedly. If you remain in the
vehicle and lock the doors with the RKE transmitter, once
the system is armed (after 16 seconds), when you pull the
door handle to exit, the alarm will sound. If this occurs,
press the UNLOCK button on the RKE transmitter to
disarm the system. You may also accidentally disarm the
system by unlocking the driver's door with the key and
then locking it. The door will be locked but the Security
Alarm will not arm.


next time post symptoms, so we can be on the same page..

Hello. Security systems (alarms) can cause problems when they become bad. The best thing to do is disconnect the fuse for the alarm. Look in the fuse panel of your car and see which one is for the security system (alarm). Then you can pull out the fuse and it will disarm the security system. Good Luck.

You may have burned something up. Check with manufacturing codes, the rapid light flashing can be a code.

If the engine will start, and the car is drivable, find the alarm and disconnect it until such time as you can get to a repair shop. If disconnecting the alarm kills the engine, then use a jumper wire to bypass it. If the car won't start because of the security system, I'm afraid you will have to have it towed to a dealership or repair facility to disarm it.

On GM's like Cadillac, in general if the alarm goes off, then put the key in the driver's side door and turn the key.

Also, some fobs have a button to push to arm and disarm the security alarm.

Here is what I do on my 95 Cirrus I also do not have a keyless remote (well I do but is broke) and after frustation after frustation trying to disarm the factory alarm I find out that by unlocking the passenger front door with the ignition key from the outside will disarm it you may have to try few times before it's disarmed you need to make sure that the blinking red light stops blinking and all of the locks on all 4 door are up or unlocked, this is what I been doing for 3 years now and that's how I disarm the alarm on my car, I hope this helps.

if all key cyl disarm switch are bad , You would need to program a key fob to disarm the system....or repair one of the three disarm switchs in drivers door,or pass door or lift gate key cyl....good luck