Watch out for t-belt light. most should be replaced at minimum mileage of 60000km.
SOURCE: cambelt change
i believe it to be 50,000 miles or five years....if your not sure change it its cheaper than an engine repair!!
SOURCE: I need to buy a cambelt for jeep cherokee
check with JCWhitney.com
or even Autozone
or orielly auto parts
all you can check online
SOURCE: got audi a4 1996 diesel need to change cambelt but
A diesel uses a different procedure. You'll need a tool to hold the camshaft pulley parallel to the top of the cylinder head. The timing mark to set TDC for piston #1 is located on top of bell housing. The pointer must be aligned on the diamond cut on the flywheel. A VW/Audi setting bar tool #2065A is needed to lock the camshaft in position. Lock the injection pumpin position using the special lock pin (VW/Audi special tool no. 2064). Caution: If the drive belt is broken or has jumped time, do not attempt to lock the sprocket at this time!!! You will also need VW/Audi special tool no. VW210 to measure belt tension between camshaft sproket and injection pump sprocket. So good luck.
SOURCE: Hi we are changing the cambelt on a vw 1994 t4
crank marks are on flywheel--pull the cap off on top ov the box and u will c the flywheel,turn clockwise untill pointer lines up with a punch mark on flywheel.
94 views
Usually answered in minutes!
×