What is the valve clearance of isuzu 10pd1 and firing order

SOURCE: FIring Order of a 2004 Isuzu Rodeo 3.2L Engine

My apologies for the delay....Due to the bad economy the number of questions posted has skyrocketed 50% in the last 4-months.

For 2WD and 4WD it is the same:
For 3.2L:
Firing Order:
1-2-3-4-5-6
Cylinders:
5-------6
3-------4
1-------2
(front of vehicle)
Coil is on the Spark Plug

Let me know if this helped, or if you have additional information or questions. Feel free to contact me at FixYa.com!

SOURCE: What's the Valve Clearance for an Isuzu 6BG1

.14mm on both intake and exhaust valve.

SOURCE: FORD cortina 3.0L V6 starting problems.recon tops

Have a look at the coil and its supply lead, standard it has a 9v coil and a resistor wire in the harness, this gives trouble ar resistor wire is odd and will not solder or weld and its expansion when hot loosens crimps! If you put 12 volts into a 9v coil it overwhelms (magneticly) the windings and gives a poor spark, also burns the points.

SOURCE: i need the valve clearance

This should be located under your hood on a sticker that will show you the value clearance.......

SOURCE: valve clearance 4hj1 isuzu engine

This is the specs for the 4H Diesel engine:
Intake valves clearance cold 0.4mm(.016inches)
Exhaust valve clearance cold 0.4mm(.016inches)