Question about 1995 Land Rover Range Rover

2 Answers

Abs and traction contol light up

N reg 4.6hse range rover problem is when i press the brake pedal i get hand brake abs and traction control lights flash up on dash board but go out again after a second or two any ideas

Posted by on

  • spiritmc Aug 31, 2009

    brake pads been changed also brake fluid is ok

×

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    New Friend:

    An expert that has 1 follower.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 32 Answers

I'd have the brake accumulator checked. Try this. From a cold start, e.g., an overnight stop, release the handbrake (as it also operates the dash berake light), start the engine, and time how long it takes for the brake light on the instrument panel to go out. If it's up near 45 seconds, your accumulator is probably on the way out. They do fail after some years.

Posted on Dec 21, 2009

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 73 Answers

One of the break calippers is not working ok so the wheel is locked first while other 3 is running !!! small differrence is in computer unit big so that is the abs faul ....your posiblre problem also check break pads !!! and break fluid

Posted on Aug 30, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Why does my ABS light stays on and sometimes i get a vibration in the brake petal causing my 2002 Cadillac escalade not wanting to stop?


Sounds like a fault with the Antilock Braking System. The vibration in the pedal is the ABS working. With your foot on the brake pedal, it releases and re-applies the brakes to stop a skid from the wheels locking up. You need professional service for brakes.

Seems to be a known issue on all Cadillac and requires the ABS module to be replaced.

ABS Light Due to ABS Control Module Failure : Cadillac ...

repairpal.com > Problems > Cadillac > DeVille Cadillac DeVille ABS Light Due to ABS Control Module Failure. This is a verified problem based on 126 reports. Learn more about this problem, when it occurs ...

ABS Light Due to ABS Control Module Failure : Cadillac ...

repairpal.com > Problems > Cadillac > Seville STS Traction control and ABS lights stay on dash. This is due to ecbtm Module gone bad. replace Module and this should fix the problem. You can go by the VIN and ...

ABS Light Due to ABS Control Module Failure : Cadillac ...

repairpal.com > Problems > Cadillac > DeVille DTS ABS Light Due to Control Module Failure on Cadillac DeVille DTS. The anti-lock ... ABS and Traction control light stays on. ... abs light to abs control stay on.

ABS Light Due to ABS Control Module Failure : Cadillac ...

repairpal.com > Problems > Cadillac > Seville SLS ABS Light Due to Control Module Failure on Cadillac Seville SLS. The anti-lock brake ... SLS135,000Jumsee. Abs and traction lights stay on when started.

Jan 12, 2016 | Cadillac Cars & Trucks

1 Answer

All brake lights and traction light Or on the dash and my brake lights will not work 2006 Cadillac CTS


The traction control system is part of ABS control module an if the light is on there is A DTC - diagnostic trouble code stored in the EBCM - electronic brake control module ! The brake pedal position sensor is an input to the EBCM , when you press the brake pedal the EBCM then energizes the BAS relay in the left rear fuse box turning on the brake lamps !
There could be a DTC like
DTC B3903
The electronic brake control module (EBCM) supplies voltage to the BAS relay coil side voltage supply circuit when the stop lamps are active. The coil side control circuit of the BASS relay is permanently grounded at G402.
DTC Descriptor
This diagnostic procedure supports the following DTC:
DTC B3903 Stop Lamp Relay Circuit
Or
DTC C0278
The brake pedal position sensor (BPP) is a potentiometer. The electronic brake control module (EBCM) supplies a 5-volt reference circuit and low reference circuit to the BPP sensor. The BPP sensor signal circuit is a direct input to the EBCM. The EBCM determines the BPP based on the voltage from the BPP sensor. The EBCM converts the BPP sensor feed back voltage to a digital signal and puts it on the class 2 communication bus.
DTC C0282 Brake Pedal Position Sensor Circuit Range/Performance
DTC C0283 Brake Pedal Position Sensor Circuit Low
DTC C0284 Brake Pedal Position Sensor Circuit High
DTC C0880 Device Voltage Reference Output 2 Circuit
You may want to take this to the dealer !

Jul 14, 2015 | Cadillac Cars & Trucks

2 Answers

Transmission fault traction reduce land rover range rover 2006


HI THERE AT MY RANGE ROVER 2003 THE LO LIGHT COMES ON AND I CANT DRIVE ANY MORE ! THE CAR STARTS BUT THE AUTOMATIC GEARBOX DOESNT CHANGE! I MEAN I PUT IN D NO REACTION IN R NO REACTION IN P COMES A SLIGHT SOUND !
MAYBE GEARBOX PROBLEM ?

Oct 06, 2011 | 2006 Land Rover Range Rover

1 Answer

2008 ford escape abs and traction control light is on, if the car sets over night the traction control light and abs lite doesn't come on until a few minutes and after the car sits around awhile the...


2008 Escape has a terrible reputation for ABS light and traction control light being. All due to broken ABS tone ring cracked and out of position flopping on frt bearing. Go to local AutoZone store and they will scan this to find which wheel has the broken tone ring. The replacement ring is cheap in the $7 range. It is labor that will sicken you as this ring must be pressed on after the front half shaft is removed. Not a driveway job if you are considering DYI.

Jun 21, 2011 | Ford Escape Cars & Trucks

1 Answer

Can I (safely) disable my 1999 Range Rover 4.6 ABS and Traction Control by removing the 5amp fuse, 30amp fuse, or ABS relay from the engine compartment fuse box? I don't want ABS or Traction control on for...


I have a 1998 Range Rover HSE. The ABS, TC amd Brake light stay on and now I have noticed that it is becoming harder and harder to stop. It literally feels like I dont have any brakes at all. I have to pretty much push the brake petal all the eay down in order to get it to stop. I had the pads and rotors about 6 months ago and I don't know what to do! Help please

Sep 30, 2010 | 1999 Land Rover Range Rover

1 Answer

Brake peddle is chattering 2003 ion and would like to pull the anti lock brake fuse (if safe ) until i can afford the repair. I would like to know witch fuse to pull?ABS is on and traction control


If brake pedal is chattering or pulsating it is most likely because you need either front or rear rotors, or both. They are rusted or out of round. If there is something wrong with either your abs or traction control,the abs or traction control light will come on & stay on. As soon as these lights come on, it automatically disables abs or traction control. If you would like to take out fuse that disables abs or traction control circuits, it will leave the lights on.You just wont have their functions. If by some strange condition your chattering goes away, then there is indeed something wrong with your abs or traction control.Fuses are labeled abs or traction either under hood or in your fuse panel in car.

Jun 13, 2010 | 2003 Saturn ION

1 Answer

ABS, Traction Control and Park brake light on


If you have abs sensors at the wheels, have them checked. Usually abs & trac control work off these sensors

Sep 17, 2009 | Land Rover Discovery Cars & Trucks

2 Answers

Range Rover P38A 2.5 DSE 1999 - 4 way TC light keeps blinking!


i have had this a couple of times, when they have diff trouble etc i take them to a place covered in shingle on concrete. when i figure of eight them around so everything is working hard i can detect which diff or what ever is wrong.
now when u do this for a certain amount of time, (some differ) u have to understand what happens, when round a roundabout, the wheels closer to the roundabout are turning slower, outter wheels faster as they have further to travel, this abs traction control are programmed to see it.
when u figure of 8 it gets mixed up, i have had three now had them reset and bingo. I know your abs sensors are fine as light goes like u said. the most expensive bits are working.
also i would like to add, i changed a battery on 1, the owner claimed the same prob. u have to bear in mind she could be pulling a fast 1. anyway i had it reset at my own expense as could not reason with hear, it was cured.
so there is other things there somewhere that up sets it, if u keep on figuring 8 it this does.

Jul 17, 2009 | 1996 Land Rover Range Rover

1 Answer

Abs system fault


when the abs is activated it will cause the brake pedal to jump in and out rapidly, and the ABS light will flash at the same time, is this what u are asking? is this normal? yes.

Dec 22, 2008 | 1996 Land Rover Range Rover

Not finding what you are looking for?
1995 Land Rover Range Rover Logo

635 people viewed this question

Ask a Question

Usually answered in minutes!

Top Land Rover Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Marvin
Marvin

Level 3 Expert

85178 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Land Rover Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...