At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
There is an actuator on that side. Pull the plug and put it back in, see if it works. If not, then you will need a wiring schematic to check for power and ground. If both are there, replace the actuator.
Visit www.trailvoy.com and do a search on "how to replace spark plugs", you will find threads describing the process. Make sure to use AC Delco Iridium 41-103 plugs.
Tools Required; J43094. Removal Procedure.turn Off the ignition swicht..Remove the ignition coil. Use theJ43094 in order to remove spark plug. Spark Plug type AC-41-965
Have it scanned and see if there isn't a trans code. If it is spinning out between gears that is called slippage. There is not much you can do since there are no adjustments. The only thing that it could be other than the trans itself is a problem with the TPS, Throttle Position Sensor, and if that is defective and you don't repair it right away you can do serious damage to the trans. (almost 30 years rebuilding trans and 4 of them directly for GM. I know the 4l60e extremely well) Do not drive this if it is slipping. Hope this helps.
i have 2003 trailblazer ltz 153 000 mileage i have code po440 .i changed gas cap and turned off the chech engine light... i made 300 miles and it was good and today morning i drove a mile and light turned on ..... what do i have to fix ...thanks
×