There are 4 marks on the crank pulley. When standing on the driver side of the car looking down on the pulley, the mark farthest to the right is the mark for TDC (Top Dead Center). The three marks on the left are for the spark timing. Of these three the mark in the center should align with the arrows/triangles on the timing belt cover when the engine is running and a timing light is shining on the crank pulley. The outer two marks represent Honda's tolerances for the ignition timing. As you look at the cam pulley the correct mark is at 7 o'clock with the two other marks at 3 & 9 o'clock positions. make sure you have correc timing, honda have "O" tolerance when it come to piston and the valves meets. or stop by any auto part store they should have Hane's auto repair manuel for 20.00 buck, worth all the money with proper instruction including picture, great investment to have for the future repair. spend little money to make sure you do the right job. good luck!!
Welcome to FIxYa.com
this is for a 16 valve 1.5 let me know what engine size you have
Regards, Lee Davidian
Thank you for using FixYa,com.
3,466 views
Usually answered in minutes!
×