Front end wobble in 1999 Chrysler Intrepid.

could be failed wheel bearings
most likely failed tie rod ends or suspension ball joints
take it in for a front end check
have wheel alignment done after the front end check

I had that same problem on my Toyota pickup once and replace the wheel. No more problem. Wheel must have had a certain warp to it. Normally though, this wobble you feel would be a burnt spot in a rotor. But you've replaced that.

Could be aa littleas a warped brake rotor or a tire out of balance,But needs to be checked by a qualified shop for front end ware and worn out suspension items

you need to have your tires checked for a slipped belt, also if you get a shake in the steering wheel when you apply the brake you need to have the brake rotors re-surfaced or replaced.

I have had the same problem ever since I bought my 4runner new in 99. I've tried all kinds of tires, constant balancing, rotations, alignments, brakes, you name it, I even have a new front end now, but still have wobble in the front end. It's acts like having loose tie-rod. NoOne can figure it out. LEMON?
Mike

did you have the front brake rotors machined, they are warped. either replace the brake rotors or have then machined, I prefer just replacing them as they are fairly cheap.

Discribe your version of wobble. In steering wheel,front suspension? Did you have this checked out by a shop, who gave up on it? Are the brakes related?

i think you have whats called (disk run out) have them chequed out (there warped)

Check the passenger side tire.

Couple of checks , mud in front rims will give you a wobble. Front tire cord seperation or loose wheel nuts. , Wore out tie rod end, front wheel bearing play, or a weight has fallen off the rim and it needs balancing. If it is vibrating your steering wheel, have the front end looked at right away.