BACK PASSENGER WHEEL SOUNDS LIKE ITS GOING TO FALL OFF...RE: i dont know if i explained this correctly....that answer sounds good but i have heard many diffrent things from ppl i know but urs sounds most accurate...so r u sure...what happens is as soon as i get to 75mph and up the wheel makes a vibrating type sound but its real loud...sometimes it does and sometimes it does not does that sound like it could be the same problem

You need to remove and refit wheel as it sounds as if it has not reseated properly.if it has been fitted correctly and all nuts tightened then any further wobble is either due to wheel balance ,,,, or due to compromised structure supporting wheel which need to be checked immediately..i.e. Drive shaft ....axle.....wheel bearing etc.

Could be the wheel bearing causing ur noise

check front brake pads or calipers. sometime time the rotor get a rusty spot and pads rub on this spot and a scraping is heard.

sounds like a wheel bearing but could b strut

It is probably your wheel bearings. Although, it is possible that your CV Axle could be damaged.

Hi, nice car i loved that model tough on gas tough, heavy body! Now the front wheel. i would jack it up and spin it by hand and listen real good, you can also put a solid bar on parts of the hub and also around that area and put the bar near your ear. If its bad it will sound off like you wouldnt beleive. Do both sides of car so you can hear the difference. First just spin it before going to a bar, just might hear it like that. Ask somone to spin it for you if you need to use the bar. Dont forget to put a horse under the car so the car doesnt fall from the jack on you. Alot of people die every year because of no horse. Let me know ! Frank

sounds like a wheel bearing is going out. you need to get this checked out pretty soon because this can cause more severe problems down the road

Probably a wheel bearing or brake pads GET IT LOOKED AT SMARTLY! If it's a bearing your wheel could fall off!!!

wheel hub bearing damaged, easy fix bolt on another - 4 bolts

you should replace brake hardware if you did not. use proper brake lubricate and bleed the system after all.