SOURCE: torque specs for the main bearings, connecting rods and heads
Here you go...
Connection Rod Nuts: 37-38 Ft Lbs.
Main Bearing Caps: 55-61 Ft Lbs.
And Head Bolts...
1st - step; - 80 ft./lbs.
2nd - step, loosen all bolts;
3rd - step; - 80 ft./lbs.
SOURCE: need torque specs for rod bearing caps on 1995 toyota terel 4 cyl
1.6 engine 36 ft lbs 1.8 engine 36 ft lbs 2.0 engine 49 ft lbs
SOURCE: need torque specs for connecting rod and main
Torque in two to three stages.
Connecting rods are 24-26 lb.ft.
Main bearing caps are 41-44 lb.ft.
Hope this helps,Chuck
Testimonial: "Thanks for the help Chuck"
SOURCE: I need the torque specs for the connecting rod cap
Step #1 40lbs PLUS Step#2 1/4 turn 90 degrees.....this is for 3.3 & 3.8
535 views
Usually answered in minutes!
×