Drivers side sun visor hanging loose in my way all the time

sun visor pivot point has broken plastic around post to hold visor up . the whole visor will need replaced to correct issue

http://www.ipetitions.com/petition/2002-2009toyotasunvisorrecall/signatures

If there is head of a screw on the arm that attaches to the sunvisor you can tighten that up. If not the sunvisor has to be replaced instead

If you have anything on top of the visor, remove it. If there are any screws visible near the pivot rod, tighten them. You can remove the visor and slightly bend the pivot rod, inside the visor. You can just buy a new one and replace it yourself. It's only a few screws.

I fabricated my own brackets for my 2004 Ford Explorer to mount (or should I say re-mount) my sun visors after they both crumbled and fell on us. I cut some thin metal (tin I think) and put 5 layers together to form the bracket. If there is any interest, I'll upload some pictures and instructions over the week-end to show how to install it. I'm thinking about offering to make these for $12+ shipping for one bracket or $20+shipping for a pair.

My 2008 Camry driver side sun visor just broke and it will not stay in the up position. is flops down about three inches just enough to bug the **** out of you while driving. another toyota problem that should be recalled since it seams to be common

a creative solution is to use velcro tape. a piece on the visor and a matching piece on the roof liner

My 2007 Optima Driver's Side visor also had the same problem. I removed it with the screws under the plate at the base of the visor. Upon further inspection, the plastic inside the "hinge" had shattered inside the plastic sleeve. I am currently attempting some at-home super-glue-and-epoxy repair. If this works, I've saved myself a couple hundred bucks in repairs.

time to replace the visor assy's. If they have been used frequently this problem is common.