How do I change the Power steering Suction hose on my 2002 Hyundai XG350L?

https://www.autozone.com/electrical-and-lighting/power-steering-pressure-switch/hyundai/xg350

Disconnect the negative cable then the positive cable then disconnect from the starter and repeat process in reverse

How-to: Replacing the power steering reservoir to pump hose - CEG ...

contour.org/.../82138-how-to-replacing-the-power-steering-reservoir-to-...
Jul 3, 2013 - How-to: Replacing the power steering reservoir to pump hose ... to allow air into the suction side of the PS pump, aerating the fluid. ... off the spring hoseclamps from the smaller return hose and the large hose to the pump.
images for How to replace suction and return hoses

this is the front of motor LOOK UNDER YOUR HOOD and follow belt the pully is the power steering pump

I want to change the EGR valve Myself in my 2003 Hyundai XG350L anyone know how to do that?

WOW STEP BY STEP! well its not hard im 19 and i have a hyundai xg350L and i change my rear struts by my self with two jacks. one to lift the car, and one to jack the spring and strut back up and under the car. then one vice grip and one pliers to take the nut off the strut and remove it from under the car. you will also need a rench to remove the bolt at the bottom of the strut. IT MIGHT BE A LOT TO DO BUT IM ABOUT TO REPLACE MY SPRINGS AND STRUTS AND REAR WHEEL BEARING AND I WILL POST IT UP AS A INSTRUCTIONAL VIDEO ON YOUTUBE.

http://www.partsgeek.com/catalog/2002/hyundai/xg350/steering/power_steering_pressure_hose.html


Just had mine replaced for $173.00

you should see hose running to rack shoulnt have to pull motor

First of all, Hyundai did not produce the XG350 until 2002. You wrote 2001 Hyundai XG350L. The engine in the 2001 is 3.0 (XG300). Cant help you.