The outside handle on the drivers door of my 2002 325 coupe stopped working yestreday. inside handle and evrything works just fine, but the outside one seems 'dead' any ideas?
THE MECHANISM FOR ATTACHING THE HANDLE TO THE LOCK CAN BREAK WITHOUT WARNING. I HAD TO REPLACE MINE LAST SATURDAY. IT IS A DIY JOB IF YOU HAVE THE TOOLS AND ARE COMPETENT. THE WINDOW WINDER MECHANISM HAS TO BE REMOVED AS WELL AS THE GLASS AS MOST OF THE WORK IN REMOVING AND REFITTING THE HANDLE CAN ONLY BE DONE WITH THESE REMOVED. IT TOOK ME ABOUT THREE HOURS AS THE WINDER MECHANISM WAS RIVETED TO THE DOOR AND THESE HAVE TO BE DRILLED OUT TAKING CARE NOT TO HIT THE GLASS WITH THE DRILL BIT. ALSO, THERE IS A SLIDING CLIP WHICH MUST BE PUSHED ACROSS TO REMOVE THE OUTSIDE HANDLE TRIM BEFORE YOU CAN REMOVE THE HANDLE. I DID IT WITHOUT A SERVICE MANUAL, BUT I RECCOMEND YOU GET ONE BEFORE TRYING THIS YOURSELF AS IT PROVED TRICKY. IF YOU DECIDE TO TRY IT, MAKE SURE TO HAVE POP RIVETS AND A RIVETING GUN AS WELL AS FOUR 4.5 MM FLAT WASHERS ON HAND BEFORE YOU START AS YOU NEED THEM TO REFIT THE WINDOW WINDER MECHANISM. ALSO, TAKE CLEAR DIGITAL PHOTOS AS YOU GO SO YOU WILL KNOW WHERE THINGS CAME FROM AND WHAT THE ASSEMBLED ITEMS SHOULD LOOK LIKE AT EVERY STAGE. IT'S NOT ROCKET SCIENCE BUT DOES REQUIRE CARE. LASTLY, IF YOU GET SOMEONE TO DO IT FOR YOU, MAKE SURE THEY KNOW ABOUT THE SLIDING CLIP PREVIOUSLY MENTIONED BECAUSE IF THEY TRY TO PRISE THE TRIM OFF, THE PAINTWORK WILL BE DAMAGED AND THE TRIM WILL BREAK. OH YEAH, BE PREPARED FOR A LARGE LABOUR BILL RELITAVE TO THE APPARENT SIZE OF THE TASK AS IT WILL TAKE TIME NO MATTER WHO DOES IT. GOOD LUCK
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Solution: Elect lock activator inside door either weak or is binding not pulling lock all the ... Right passenger door wouldn't open from outside, then my kid turned on the interior ... civic door won t open from inside or outside fix no drilling ... Has recently started to just suddenly lose power and stop but i can start it again and it ...
Tesla MotorsFor some reason, the passenger side front door will not open when pulling on the handle. We have the tech ... There's nothing you can do to fix it yourself. ... I tried locking and unlocking it at the restaurant and that didn't work so I just opened it from the inside. ... Handles extend, lights work, but I can't open from the outside.
somehow grab hold of the broken bit with long nosed pliers or something and open it from the inside ,invent something to do the job as no key slot on the outside of the door
handles may be in good condition but the lever on the latch itself may have came loose. your mostlikley looking at dismantelling the apolsery with the door closed to rectify it.
There is a rod inside the door that connects the inside and outside door handles to the latch mechanism, if it gets bent or broke it won't activate the latch. The inside door panel will have to be removed and parts of the mechanism also to reinstall. Would recommend maybe taking somewhere unless it's an old BWM.
I have exactly the same problem with a 2002 X5. The passenger door handle has no resistance on it from either inside or outside and as such I cannot open the door. I am now wondering how to get the trim off to see what is bust inside. Anyone got any ideas??
Since you can get the door open, half the battle is already won. Yes, open the door, pull the interior door panel and take a look around. Watch inside with a flashlight (towards the rear of the door) as you roll the window down to see if you can see what it's snagged on.
DRIVER OUTSIDE DOOR HANDLE WILL NOT OPEN DOOR. FROZE UP IN ICE STORM AND APPEARED TO BREAK WHEN TRIED TO OPEN DOOR. INSIDE HANDLE STILL WORKS. IS DIY REPAIR FEASIBLE?
outside door handle
wont open
×