At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
get under the front seats there are 4 bolts holding the seats in the floor plus a torx bolt for the lap belt, take seats out the back seat has 2 torx bolts at the front bottom of the lower cushion remove them and pull the bottom forward the back has 2 bolts holding it remove them and lift the unit straight up, be carefull there is wires under the front seat for the seat belt warning light carefully unhook them 1 for each seat now you need hog ring plairs and a bunch of new hog rings to secure the new fabric, use side cutter plairs to remove old hog rings carefully remove the seat covers, hog rings can be got at car glass shops the pliars can be got from summit racing or a place that sells car uppolstrytake your time and you can do it!!
If you look under the seat there is a cable that connects to the grab handle and runs from the left to the right of the seat adjusters, if cable falls then only one side adjuster will release and u will not be able to move seat, usually up can reinstall the cable and it's good to go, if it broke u will have to replace it.. generally u can repair it without removing the seat.
To remove the rear seats, force your hands under the front of the seat bottoms and lift with a quick, short tug. The bottom cushion lifts out with no tools. There will be a couple of bolts holding the seat backs in place.
No, like others said, there's an access plate under the rear seats. Most imports (Honda, Toyota, Nissan) have this access plate to get to the pump. Some domestics don't (90's Camaros etc)
the Jack should be located in one of the side panels in the rear hatch area or tucked under the storage under the carpet in the rear. If it is not in either of them places then check under the back seats or behind the seats, if you check your Owners manual and go to index and go to Spare and go to the page it should show you where it is located.
Not at the present time. i haven't seen any recalls due to a possible electrical fire ignition under driver seat for the Camry SE or any other model. Your insurance should take care of it no problem since it wasn't your fault. Hope this will help.
×