My jeep turns over but wont start.. the key or barrel is not the problem.
Are the headlamps flashing your alarm is on cycle the key in drivers door.or the crank sensor is not reading.
You need to see if you have spark and check all fuses and see if you have fuel pressure and injector pulse if no spark and no injector pulse suspect crank sensor or ignition control module if no fuel pressure check fuses then relays and then suspect pump
529 views
Usually answered in minutes!
car is turning over as normal, fuel is going through but not starting..someone said it could be immobiliser or faulty crankshaft sensor.many thanks
fuel is going through, car goes to start as normal but cuts out, someone suggested faulty crankshaft sensor or immobiliser. Many Thanks
×