What is EVAPORATIVE EMISSION CONTROL INCORRECT PURGE FLOW in Mitsubishi Mirage? and how do I solve the problem?
This indicates that a part of the EVAP control system is no longer fuctioning correctly. The EVAP system consists of many parts, including (but not limited to) the gas cap, fuel lines, carbon canister, purge valve, and other hoses. Try changing the gas cap first then check the rubber hoses that are visble on top of the engine. Vote "Yes" for me!
Have the purge solenoid and the purge cannister looked at.if it is not dumping correctly,it will set off a code
SOURCE: What is EVAPORATIVE EMISSION CONTROL INCORRECT
fumes from evaporating gas in your tank are captured and absorbed by a canister rather than being vented to atmosphere as they used to be ... when you start the car it purges the fumes from the canister and directs them into the intake manafold where they are burned with normal gas ... often over filling the tank can cause gas to flow into the canister instead of just fumes .. this may, in time,fix itself if you avoid overfilling the tank unless there is a failure somewhere in the evaporative emission control system ..(vacuum hose, solonoid, gas cap and such) .. a bad, loose or leaking gas cap can cause a problem by allowing air to leak into the canister ..
1,013 views
Usually answered in minutes!
evaporative emission syatem high purge flow
×