Cars & Trucks Logo

Related Topics:

Kimberly Yarbrough Posted on Jun 29, 2019
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

Speed sensor in a 2000 Chevy cavalier. And where's it at and look like?

1 Answer

Grace0007

Level 3:

An expert who has achieved level 3 by getting 1000 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Genius:

An expert who has answered 1,000 questions.

  • Cars & Trucks Master 1,249 Answers
  • Posted on Jun 29, 2019
Grace0007
Cars & Trucks Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Genius:

An expert who has answered 1,000 questions.

Joined: Nov 29, 2018
Answers
1249
Questions
0
Helped
203428
Points
4644

The service and repair manual with diagram will provide all the knowledge to locate and fix the problem easily and you will get the manual from the given link Home Toolsnyou

5 Related Answers

MikeRenee

  • 69 Answers
  • Posted on Mar 22, 2009

SOURCE: where do I find Speed sensor in 2000 Chevrolet

Are you referring to the Vehicle Speed Sensor or VSS? If so it is located on the transmission. There should be a plug on the trans. for the reverse lights and another one for the VSS sensor. Its been a while since I looked at them in person but I think the VSS was the one towards the firewall and almost right under the brake booster. Hope this helps.

Ad
ZJLimited

ZJ Limited

  • 17989 Answers
  • Posted on Apr 25, 2010

SOURCE: replace a fuel pump on 2000 chevy cavalier

REMOVAL & INSTALLATION
(see Figures 1 and 2)

CAUTION The fuel injection system remains under pressure, even after the engine has been turned OFF. The fuel system pressure must be relieved before disconnecting any fuel lines. Failure to do so may result in fire and/or personal injury.

  1. Relieve the fuel system pressure using the recommended procedure.
  2. Disconnect the negative battery cable.
  3. Drain the fuel tank, then remove the fuel tank from the vehicle.
  4. While holding the modular fuel sender assembly down, remove the snap-ring from the designated slots located on the retainer.

WARNING The modular fuel sender assembly may spring up from its position. When removing the modular fuel sender from the tank, be aware that the reservoir bucket is full of fuel. It must be tipped slightly during removal to avoid damage to the float.
  1. Remove the external fuel strainer.
  2. Detach the Connector Position Assurance (CPA) piece from the electrical connector and detach the fuel pump electrical connector.
  3. Gently release the tabs on the sides of the fuel sender at the cover assembly. Begin by squeezing the sides of the reservoir and releasing the tab opposite the fuel level sensor. Move clockwise to release the second and third tabs in the same manner.
  4. Lift the cover assembly out far enough to detach the fuel pump electrical connection.
  5. Rotate the fuel pump baffle counterclockwise and remove the baffle and pump assembly from the retainer.
  6. Slide the fuel pump outlet out of slot, then remove the fuel pump outlet seal.

To install:
  1. Install the fuel pump outlet seal, then slide the fuel pump outlet in the slots of reservoir cover.
  2. Install the fuel pump and baffle assembly onto the reservoir retainer and rotate clockwise until seated.
  3. Install the lower retainer assembly partially into the reservoir. Line up all 3 sleeve tabs. Press the retainer onto the reservoir making sure all 3 tabs are firmly seated.

Gently pull on the fuel pump reservoir from retainer to assure a secure fastening. If not secure, replace the entire fuel sender.
  1. Attach the fuel pump connector.
  2. Fasten the CPA connector to the fuel sender cover.
  3. Install a new external fuel strainer.
  4. Install the modular fuel sender.
  5. Install the fuel tank in the vehicle.
  6. Connect the negative battery cable.
  7. Pressurize the fuel system and verify no leaks.
35a484a.jpg

Fig. 1: The module fuel sender assembly is mounted in the fuel tank

fbd4d43.jpg

Fig. 2: Modular fuel pump component identification




Hope this help to solve your problem (remember comment and rated this).

Gozer

Mike Raatz

  • 435 Answers
  • Posted on Jun 02, 2010

SOURCE: 2000 Cavalier: Spark plug gap for a 2.2L Chevy Cavalier 2000...

The plug gap is .040

johnjohn2

Johnny Brown

  • 5763 Answers
  • Posted on Jul 21, 2010

SOURCE: i bought a speed sensor and i need to know how am

No, trany doesnt come apart, the sensor is locted on the top of transaxle, if you follow the pass/side axle to trany you will see sensor,you just remove the bolt holding the sensor then wiggle sensor out and install new one, heres a picture of its location.05ae7ce.gif

Anonymous

  • 43 Answers
  • Posted on Nov 26, 2010

SOURCE: "trac off" light on on 2000 chevy cavalier

YOU HAVE AN ABS PROBLEM- TAKE TO REPAIR SHOP.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer
0helpful
2answers
1helpful
1answer

2000 chevy cavalier fuse problem and /or speedometer problem

Speedo problem, no fuse for that. It could be the speed sensor. It is located on the back side of the transmission, on the passenger side. Not to hard to get to.
1helpful
1answer

Location of speed sensor on 2002 chevy cavalier 4cyl 2.2L

the speed sensor is located on the trans axle on the right side housing before the half shaft.there should be a sensor with a wire plug connected to the sensor.
7helpful
3answers

"trac off" light on on 2000 chevy cavalier

YOU HAVE AN ABS PROBLEM- TAKE TO REPAIR SHOP.
0helpful
1answer

Chevy cavalier94

make sure that first the anti freeze level is correct. Then check the temputer sensor-fan might be cutting out if sensor is miss reading.1. temp sensor 2. fan
0helpful
1answer

I need to Know where the speedometer sensor is on a 1991 chevy cavalier Z24 3.1 mutiport with an Automatic transmission 2WD

The speed sensor for your 1991 Chevy Cavalier Z24 is located on the transmission just inboard of where the passenger side drive axle enters the trans-axle.
1helpful
1answer

Does my 1998 chevy cavalier have a speedo cable or is it electronic

More than likely it is an electronic speed sensor. There should be a two wire plug near one axle or the other. Also, the wheels will have speed sensors if you have ABS.
0helpful
1answer

Speed sensor problem

the speed sen is located in transaxle housing at rear right driveaxle.
Not finding what you are looking for?

32 views

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...