My 2005 Chevy equinox blower motor was out so I replaced it and the resistor, turned the car on and the fan is only on high and won’t shut off until I turn the car off. It won’t go to a different setting just stays high even if I switch it to medium, low or off what could be the problem?

SOURCE: 2000 Ford F-250, Fan switch/ blower motor...

sounds like blower motor resistor is shot.

Testimonial: "Good call. That did it. Thanks "

SOURCE: Blower won't shut off

You will need a Blower motor resistor and maybe a blower motor resistor connector end. If you look under the dash on the passenger side(may need to remove smooth black cover, vents will be sticking out) you will see a connector going straight up into the blower motor resistor(7 wires/slightly in front of blower motor). Pull out the connector and check for melted terminals/wires. If no melted terminals just replace blower motor resistor with part # 89019088 per GM to revert to part before 04 in order to stop blower motor resistor relay from hanging. Let me know if i can help more.

SOURCE: 2001 Chevy Blazer blower motor not working

It keeps burning out blower resistors because of the blower motor drawing to much amperage so you will need to replace the resistor and blower motor

SOURCE: How do i change the Blower motor resistor on a 2005 chevy impala?

The blower motor resistor is located behind the glovebox mounted in the fan housing box under the dash.

SOURCE: 2005 chevy equinox. Blower stopped working..

John,
What's it going to take to pry that corrective action out of you? I've been trying to help someone w/ the same identifcal problem for a few days now.

Testimonial: "Bossier62 Is AWESOME! John Cushing, 6308087542 Thanks for posting my name on the internet. Not very nice. Answered ealier. Did not show. Not my fault"