SOURCE: cobalt no spark
I was going to say crank sensor, but you changed it. What have you done to it latley? Or did this just start? I kinda want to say PCM for some reason. Any welding done on the car latley?
SOURCE: cranks and no spark no power at coil pack
i believe this line is fused from the E.C.M.,go to your local library and find a chilton's auto manual,this will tell you for sure
SOURCE: 2003 chev malibu wont start due to lack of spark
That car has 2 crank sensors , did you replace both? One is at the front crank pulley and the other is behind and low on the engine block, above oil pan. Be sure the ICM (ign control module has a good ground, (black wire) it grounds at a bracket where the trans bolts to the engine approx at the 2 o'clock position.
Testimonial: "the check the ground was a good suggestion, i will do that at my first opportunity"
SOURCE: no spark,new coil still no spark,crank sensor? 95 dodge ram 5.2 l
Could possibly be the ECM or computer it may be the crank sensor. The crank sensor is probably the cheepest so I would start there. Since it sound like you may be throwing parts at this, since you cant drive it to have a diagnostic done and you can't have the crank sensor tested, I would buy a used one from a junk yard to see if that is the problem to save a little money since you may have to buy somthing else if that does not work. Good luck
80 views
Usually answered in minutes!
×