Question about 2009 Chrysler Aspen Hybrid

Open Question

09 Chrysler Aspen Hybrid. Hybrid warning light been coming on. Code: voltage was too high @ times. Would this cause the accelerator to surge or have difficulty engaging accelerator?

Posted by on

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
steve_e_uk
  • 1675 Answers

SOURCE: Mazda Tribute 4cyl 2001 Yellow engine warning

hi this sounds like the EGR needs to be replaced as the voltage has exceeded its normal rate this is a sign of component failing these are not repairable and you will need a new one, i have put a link on here for you so you can see the in's and out's of the egr valve for you, these are normally located on the fire wall/bulk head just below the panel that holds the wiper motor mechanism but it could be anywhere in that area, the link also includes how to test these. http://www.kulls.com/egrsensors.htm
hope this helps

Posted on Oct 27, 2010

Ad
  • 18108 Answers

SOURCE: CHRYSLER ASPEN HEMI-HYBRID 4WD-09. Torque on 3 hub bolts and the driveshaft in the middle?

Go to autozone dot com and make a free account put in the year make and model and look for the free repair guides. All the torque info is there.

Posted on Oct 05, 2015

rwwood81766
  • 5525 Answers

SOURCE: My 2009 Crysler Aspen hemi-hybrid 4WD dont start?!? Its the only one in europe!

Bad grounds can cause low voltage codes .

Posted on Jun 08, 2018

Testimonial: "Strange, that nobody of like 10K made of the 2009 Chrysler aspen hemi hybrid limited 4WD, had the same totally malfunktion?!? It just says "system off" on display.... ?? And i changed the dammed TPIM-PUMP that the shop said was the fault... Fckkk! Even had to get it IRL in America.. Because it was impossible 2 find, even on the net. Soo now the supadupaSUV is still standing still after a year AND 2 thoosen ?? dollars just for shop-hours + paying 6 hundred dollars for the TPIM-PUMP... THE HYBRID SYSTEM CANNOT FIND MY NEW TPIM-PUMP!?! What 2 do?!? ??"

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Automatic fwd downshift problem


suggest you take it to a transmission shop and have them service it . being it hasn't been made yet . LONG time till 20009

Oct 05, 2017 | Chrysler Cars & Trucks

1 Answer

Toyota prius 2005 shows up problem after scan its code P0A0D


the only P0A0D codes in the autodata book have a-350 or 351 in the code
both refer to the hybrid battery pack--high voltage fuse--circuit high=== causes wiring--connections--hybrid control module --hybrid battery pack---high voltage fuse --inverter/ converter
following work on the engine check all connections
if that code is not relevant you may have to get it from a service dealer to find out the causes of the code

Dec 31, 2016 | Toyota Cars & Trucks

1 Answer

Code P1126 Chrysler Aspen 2007


Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
P1126 Chrysler OBD Code Description
Throttle Control Motor Relay Circuit Open is one of the definitions for the P1126 Chrysler; however your vehicle's manufacturer may have a different definition for the P1126 Chrysler code. Please check below for your specific make.
P1126 Chrysler Information for specific makes
Locksmith Hamburg NY 716 646 8383 24 Hour Locksmith In Hamburg NY

Aug 04, 2016 | 2007 Chrysler Aspen

1 Answer

CHRYSLER ASPEN HEMI-HYBRID 4WD-09. Torque on 3 hub bolts and the driveshaft in the middle?


Go to autozone dot com and make a free account put in the year make and model and look for the free repair guides. All the torque info is there.

Oct 05, 2015 | Chrysler Cars & Trucks

1 Answer

2008 Chrysler Aspen - All gages will randomly drop to zero while driving, all warning lights will come on, gages go back to normal and airbag light stays on for a short time 4-5 seconds). Any idea wh


I would guess a bad ground wire. First check the battery terminals. Then check the black wire coming off the battery. Make sure this connects firmly will no dirt or rust in the way. If that doesn't work I'd think your had a problem with the ignition cylinder (where the key goes) that's much harder to work on though.

Oct 07, 2014 | 2008 Chrysler Aspen

1 Answer

2002 toyota prius warning light - car with exclamation mark


The light that looks like a car with an exclamation mark in the middle of it is the HYBRID WARNING light (see diagram below) You must scn the onboard computer network to determine why this light is coming on. You also need to scan your computer system to find out why the engine keeps dying. If the hybrid batteries are discharged, they must be properly recharged to prevent serious damage.

CAUTION: Read ALL service and warning lables in the engine compartment before attempting ANY type of service on a hybrid vehicle. The wiring harnesses that have ORANGE connectors are HIGH VOLTAGE connectors and can cause serious injury or death.

DO NOT touch any wiring harness or component that has a HIGH VOLTAGE warning label on it.

My recommendation is to tow the vehicle to a qualified hybrid repair center (preferably the dealer) and get it properly diagnosed and repaired. The high-tech, high voltage systems in this vehicle is nothing for anyone but a trained, certified technician to be messing with.


5_21_2012_12_29_44_am.jpg

May 20, 2012 | 2002 Toyota Prius

2 Answers

Honda code P0A7F


I have a 2006 Honda Civic Hybrid and have had hell with it. I have also learnt much about it too.

One thing bad about the HCH2, is that the 12V battery controls the electronics, and the Hybrid battery charges the 12V battery. However the 12V battery is not charged all the time, and cannot be charged when the IMA is usually being used, and in different scenarios. (Buy a Electronic volt meter which plugs into the 12V adapter $14 Walmart))

It is possible that the 12V battery is being drained while driving and caused a voltage drop which can cause your problem. In your case, I would change the 12V battery anyway as they do not last long on Hybrids. (You may have to get Honda to trip the IMA warning lights.) In my case, changing the 12v battery helped the hybrid battery as it was the electronics reporting the charge level wrong.

Depending where you live, you will have a minimum 80,000 mile warranty on the hybrid battery.

Apr 14, 2010 | 2007 Honda Civic GX NGV Sedan

1 Answer

Accelerator has surged many times, sometimes while


Did the 'Check Engine' Light come ON? Whenever the 'CHECK ENGINE' light comes on, the ECU (Engine Control Unit) sets a Diagnostic Trouble Code (DTC). These codes identify the particular engine management system which caused the light to come on. You'll need to use/find an OBDII (On-Board Diagnostic) Scanner to retrieve any code which have been stored in the ECU computer. Afterward, we might be able to help you DIAGNOSE and perhaps eventually fix the problem.

Oct 06, 2009 | 2006 Hyundai Sonata

Not finding what you are looking for?
2009 Chrysler Aspen Hybrid Logo

Related Topics:

32 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

Marvin
Marvin

Level 3 Expert

85206 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...