Cars & Trucks Logo

Related Topics:

Bubba Reel Posted on Jun 24, 2019

Does any one know what vacum hoses need to b hooked up and what doesn't if deleted smog pump

Someone delelted smog pump and had it running great. New person bought it and tried to hook smog pump back up and marked the hose from junkyard pump but didn't take pic of were they go. I bought truck and just want to ,aka it run with out smog plz help what VACUM hose need to b on and what can I plug sry it is a 91 mazda b2200

4 Related Answers

Anonymous

  • 4803 Answers
  • Posted on Dec 20, 2011

SOURCE: vacum hose

There are several variables here. First, it must be determined if your vehicle is equipped with emission controls that were certified for sale in California. (This makes a big difference on vacuum hose routing) Then, there are different diagrams for early 1993 models and late 1993 models. My recommendation is to either buy the Mis=tsubishi shop repair manual for your vehicle, or subscribe to an information service such as AllData DIY. That way, you can look at the diagrams and compare them to what you actually have under your hood. AllData DIY is currently available for a single vehicle for only $26.95/year. It has all the service information you could ever need for your vehicle. Click the following link to check it out. AllData DIY

Ad
A

Anonymous

  • Posted on Jun 06, 2012

SOURCE: i need a diagram for the vacum hose on a 1979 lincon continental

Besides being illegal to do so,just leave whatever
you referring to the way it was.

Things many not still be working, after more than
30 years,but you worry about tha,t come inspection time.

The diagram should be up under the hood, on the
Federal Emissions Label,remember why it is there,
leave things was required

Anonymous

  • 1 Answer
  • Posted on Jan 20, 2013

SOURCE: I have hard break peddle

i have ford f250 91 diesel but i don't now were the vacuum pump is locate i need diagram please

hoyle_jeremy

Jeremy Hoyle

  • 232 Answers
  • Posted on Dec 05, 2014

SOURCE: need vacum line arrangement for 351 winsor

the diagram should be under the hood or use a haynes manual

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

05' F 150 with 4.6 trans fault lit up and od light flickers on and off. It runs great just went shift w bg en you get up to 40 or 45 mph ? What could it be? Someone told me it could be a sense our or...

It runs great just went shift w bg en you get up to 40 or 45 mph ? What ??? why don't you wright out what you mean , no abbreviation . Transmission has no vacuum hose's .
1helpful
1answer

Reset computer on 2002 ford expedition. fuel pump has been replaced and has new battery. need to pass smog.

What ? the monitors aren't set ? Need to do drive cycle to get them to set . Do you have a check engine light lit ?

Ford Motor Company Driving Cycle
0helpful
1answer

Need vacum line arrangement for 351 winsor

the diagram should be under the hood or use a haynes manual
0helpful
1answer

Can I get some help here.I bought a GMC 1989 king

Next to the hose routing, there should be a VECI label -the Vehicle Emission Control Information label. If your particular vehicle had a smog pump, the label will definitely list it. As for other models, I don't Know, probable that back then some did and some didn't. California requirements were always stricter than other states.
0helpful
1answer

Replacing smog pump

are their two pumps it usually unbolts like an alternator with a tube hook up at the rear a new gasket will come with the pump
0helpful
1answer

Ac doesn't blow in front vents but works everywhere else how can I fix

vacum line off or cracked from intake manifold to vacum controller under dash. to test under dash buy cheap vacum test from parts store conect tovacume port underdash pump up and with ac running you will gain control of vents. take your time and researh location of vacum line. good luck
0helpful
1answer

I have a 1978camero z28 I recently put in a motor from a 1987 everything runs great just can t get it to pass smog the gases are to high and the timing is off but I had it timed three times and the last...

The 78 Z-28 from what I recall didn't have a smog pump, just a catalytic converter and a vapor canister. The 87 engine, I believe had a different set up dependant on whether it was a California engine or not. The rpm adjustment on the 78 was a manual adjustment. Are your vapor recovery hoses all hooked up? As far as the gases being too high, what are the levels?
1helpful
1answer

When i turn on heat or ac it runs on the defrost setting but wont shift to the vent or floor until the 4 wheel drive knob gets turned on 1999 f250 I heard this was a common problem is it the switch for 4x4...

you have a vacum leak in the 4x4 engagement system. there is a vacum solenoid on the passenger side next to the battery. should have 3 hoses to it I believe. check those hoses for cracks they go all the way to both front wheels. the ones in the wheel wells are usually messed up. if all hoses are good hook up a hand held vacum pump to each wheel they should hold about 15 hg on the vacum guage if not your wheel hub seals are leaking.
Not finding what you are looking for?

23 views

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...