At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
3.3 engine,,, 1990 oldsmobile cutlass ciera,,,, when starting the engine in morning,, (first time) ,,, it starts and operates nomal,,, when the engine warm,s up,, ( around 10 or 15 minutes after running ),, motor shut,s down,,, will start and run again after letting it sit around 30 to 40 minutes,,, and then do the same thing
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
MAF is probably not the problem - sounds like the engine is not getting the fuel it needs to start and either your injectors are fouled or the pressure regulator is stuck - that might cause the hot wires. The fuel pressure seems a bit low, but it should momentarily drop when trying to start the engine.
Two people, one to pump the peddal and one to open and close the bleeder valve....
Person 1 pumps the peddal 5-6 times, then holds the peddal, while person 2 opens the valve till the peddal hits the floor, then person 2 closes the valve.
you start on the Passenger rear and do this till you get no air and only fluid, then repete process on Drivers rear, then Passenger front, the Drivers front...
Make sure valve is closed when pumping or realsing the peddal, as this will allow air into the system.
Check fluid level after each wheel to ensure you don't run empty during operation.
×