The cables are snapped to this manual 3rd row seat so I can't lay them down. Is there a way to lay them down without getting cables fixed?
SOURCE: Stuck seat belts in 2000 Chevy Tahoe
There is no fix but to replace the belt, do you want to take them apart and risk them not working correctly in a collision??
SOURCE: removing the 2nd and 3rd row seats
3rd row, you simply pull the lever which makes the back fold down and then grip the handle located on the bottom and pull toward you slightly hard. They are heavy so it seems like they aren't coming out, just pull hard. second row, you flip all the way up and push with them standing up and they come unhooked. Good Luck! I didn't have any problems, except they are at least 50+lbs!
SOURCE: 2005 Mercury Mountaineer rear end whine, how hard to fix
Before you do this you might want to try fresh gear lube. On Ford products they use a synthetic additive in the rear and not in the front 4x4 axle.
The next thing would be to determine if it is a wheel bearing or a pinion bearing. You have to pull the axles and eliminate them as the problem. You might get lucky and not need to do the pinion.
The technical part of shimming the pinion gears with replacing the pinion bearing is about the worst part of the job. You won't know about the gears until you see them. You will need extra shims on hand.
It is a moderate job for two people. If you have all the parts it can be done in a day.
Testimonial: "Thank you for your advice"
SOURCE: '07 Chevy Tahoe 3rd Row seat will not fold down
I have had this problem, and I am having it again. The problem is if a little trash gets under the bar in the floor, it will keep the mechanism from locking completely. I had tried everything. The only solution so far is the rock back and forth. Real pain. I am trying to find a secret release.
SOURCE: 2007 Tahoe 3rd row right seat will not fold
I solved the problem by spraying WD40 into the front side of the seat support that was sticking. This support has a rubber closure to protect the mechanics of the seat. After spraying a generous amount of WD40, I waited about 5 minutes and tried the lever to fold the seat. It worked and still does.
173 views
Usually answered in minutes!
×