Where is the crank sensor on a 2009 2.7 l santa fe

SOURCE: Knock sensor location

Knock Sensor Description addthis_pub = 'car-suff'; A quality Knock Sensor is more important than ever thanks to today’s increasing gas prices. Your Engine Knock Sensor enables your vehicle to obtain the optimum combination of timing and fuel/air mixture to generate power and efficiency and that means less wasted gas. Our guaranteed low prices make us your one-stop Knock Sensor Location. Regardless of the brand, make or model car, truck, van or SUV you drive, we make it easy to locate the application specific Knock Sensor that’s perfect for your vehicle. Our state of the art parts locating system puts you just a few mouse clicks away from the Knock Sensor you need and at a price you cannot beat anywhere. Click. Click. Click. And you are there. In addition to robbing you of fuel economy and performance a faulty Knock Sensor can cause expensive damage to your engine. Remember, the Knock Sensor keeps fuel from detonating in the cylinder … exploding rather than quickly burning as it should. If not replaced a faulty Knock Sensor can quite literally cause hundreds if not thousands of dollars in damage. There is really no need to look any further to find the Knock Sensor that’s application specific for your car, truck, van or SUV – high performance or family vehicle. We’ve got guaranteed low prices and shipping that other suppliers envy. Give us a try, we think you’ll be happy … in fact we guarantee it.

Michael Galve

• 1269 Answers
• Posted on Oct 28, 2008

SOURCE: HOW TO YOU GET AT PRESSURE SENSOR ON COMMON RAIL HYUNDAI SANTA FE 2007 CDX

This is what it looks like

SOURCE: location of crank position sensor 2003 santa fe 4

hi the sensor is in with the timing belt. You will have to remove the timing belt cover and belt to put a new one in. You will also see a small gold metal rotor that spins on this sensor also replace that or it will trash the new sensor.

SOURCE: would like to see a diagram of where exactly the

Which engine?? V6 or the 2.4I? The V6 CKP is in the engine block near the flywheel side of the engine (behind and lower right of the exhaust manifold nearest the radiator) A 10mm bolt holds it in place. On the 2.4 4cylinder, the sensor is at the front of the engine behind the Timing Belt cover at the crank shaft. To replace it, you have to remove the timing belt, but you also need to know some technical things to reinstall the belt to be sure you are installing it correctly. Go to http://www.hmaservice.com/ and register. You'll then have access to lots of technical info and manuals, wiring diagrams, etc. about your vehicle.

SOURCE: where is the trans speed shaft sensor on a 2001 hyundia santa fe?

There are two speed sensors, Input sensor is located on top of the bell house. Output sensor is located on the firewall side of the bell house.