Question about Chrysler Cars & Trucks
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: Crank sensor and camshaft sensor
The crank sensor is in the top of bell housing of the transmission towards the back of the engine compartment. The cam sensor is built into the distributor.
Posted on Mar 07, 2009
you need to loosen the clamp on the throttle body and unplug the map sensor then there are two clips on the other end pull that out and you should be able to pull the filter out you don't need to take the box off.
Posted on Apr 28, 2009
I would check if it is in the gas tank on that model. you can go to your local parts store and they should be able to inform you of this.
Posted on Jul 12, 2009
i have same car, same problem was $2 fuse located on top of battery (not beside drivers panel) Hopefully my problem is FIXED FOR GOOD!!!!
Posted on Jul 22, 2009
HAVE SEEN THIS BEFORE AND THE STARTER HAS BEEN THE CULPRIT..HAVE NEVER REPLACED A FUEL PUMP ON ONE OF THESE VEHICLES AT ALL
Posted on Aug 31, 2009
Testimonial: "I replaced the starter. This job is quite substantial. Also found the nut connecting the cable to the starter coil was not tight. I think it is fixed."
Tips for a great answer:
Jan 26, 2016 | Cars & Trucks
Jan 01, 2016 | 2002 Chrysler Sebring
Mar 29, 2014 | 2002 Chrysler Sebring
Sep 10, 2011 | 2002 Chrysler Sebring
Jan 05, 2011 | 2002 Chrysler Sebring
Apr 14, 2010 | 2003 Chrysler Sebring
Mar 08, 2010 | 1998 Chrysler Sebring
Nov 08, 2009 | 2002 Chrysler Sebring
Aug 25, 2009 | 2002 Chrysler Sebring
Jul 16, 2009 | 2002 Chrysler Sebring
33 people viewed this question
Usually answered in minutes!