Question about 2006 Pontiac Montana

Open Question

Tilt steering lever removal 2006 pontiac montana

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
  • 67 Answers

SOURCE: can't remove back seats of 2007 pontiac montana

Had same problem with my '04, yank HARD, lol. Warehouse guy walked up, grabbed the cord and bang! up it popped. Good Luck.

Posted on Jan 30, 2009

Ad
daves944
  • 1050 Answers

SOURCE: 2003 Pontiac Montana Front Wheel Bearings

Remove the wheel, remove the hub nut, remove the brake caliper and rotor, put your socket and extension through the hub flange onto the bearing retainer bolts, undo them, release the abs sensor connector if it has it, remove the bearing and hub flange as an assembly, put the new one on and go backwards from here. Torque the hub nut to 180 ft/lbs, your done.

Posted on Apr 08, 2009

Molson02536
  • 3854 Answers

SOURCE: pontiac montana oil pan bolt diagram for removal

If all the bolts are off, then the gasket is holding the oil pan in place and your going to have to tap it with a mallet, Not a hammer but a mallet so you don not damage the oil pan. Good luck and hope this helps.

Posted on Jul 13, 2009

BCAS1298
  • 3092 Answers

SOURCE: 2006 Pontiac Montana wont start after replacing

Sounds like your starter solenoid is stuck in the on position if you can get down there and have some one hook the battery on, hit the starter with a hammer some time this will disengage the starter.

Posted on Dec 13, 2009

fingaz22
  • 1068 Answers

SOURCE: Changing the front brake pads on a 2006 Pontiac Montana SV6

no that is only the older rear calipers on gm and others. the fronts do not have that style caliper and sound like the calipers are frozen and may be way your changing the pads. try opening the bleeder screw and then compressing them if they go then you need need brake hoses and if not you need calipers. god luck man

Posted on Dec 13, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Replacement ignition key 1999 pontiac bonneille


Just the key or the whole lock cylinder with key ?

Removal Procedure
Caution: Unless directed otherwise, the ignition and start switch must be in the OFF or LOCK position, and all electrical loads must be OFF before servicing any electrical component. Disconnect the negative battery cable to prevent an electrical spark should a tool or equipment come in contact with an exposed electrical terminal. Failure to follow these precautions may result in personal injury and/or damage to the vehicle or its components.
Disconnect the battery negative cable.
Disable the SIR system. Refer to Disabling the SIR System
Position the steering wheel half way between the upper and lower tilt stops (if necessary).
Remove the steering wheel. Refer to Steering Wheel Replacement .
Roll back the shift lever seal from the upper and the lower shrouds.
Remove the tilt wheel lever (if necessary). Refer to Tilt Lever Replacement - On Vehicle .
Remove the 2 TORX® screws from the lower steering column shroud.
Remove the lower steering column shroud.
Remove the 2 TORX® screws from the upper steering column shroud.
Lift the upper steering column shroud to gain access to the lock cylinder access hole.
Using a bent tip awl, insert the tip into the ignition lock cylinder access hole.
Turn the ignition lock cylinder to the START position.
Using the bent tip awl, push down on the ignition lock cylinder retaining pin.
Release the ignition lock cylinder to the RUN position.

Remove the ignition lock cylinder from the lock module assembly by pulling the ignition lock cylinder away from the steering column.

There may be a video on youtube .

Feb 23, 2017 | Pontiac Cars & Trucks

1 Answer

My dvd player for movies is not working has no power


Possible problems with DVD player after replacing Cabin Air Filter ...

www.topix.com > Pontiac Montana
Apr 13, 2011 - 2006 Montana. Posted in the Pontiac Montana Forum. Leave a Comment ... I recently had my cabin air filter replaced by Jiffy Lube. After they had ... If not, could the dvd player simply blown a fuse and just needs replacing? It just seems ... 14 Famous Movie One-Liners You've Been Quoting Wrong For Years. DVD Repair
Jan 18, 2010
Replace VCR with DVD player in 2001 Montana
Feb 2, 2009
Chevy Uplander "CD Mech Error"
Aug 29, 2008
Reports: 2004-2006 Chevy Uplander Sliding Door Problems ...
Aug 21, 2007
More results from www.topix.com

Pontiac montana sv6 dvd player removal - YouTube

? 1:18
https://www.youtube.com/watch?v=21TTD0ayThc
Oct 15, 2015 - Uploaded by Joshua Freeman
I recently got this 2005 montana sv6 from my grandoa and thedvd player was jamming up and not working ...Missing: movies

Jan 16, 2016 | 2006 Pontiac Montana SV6

1 Answer

My 2000 Pontiac Montana gear shift lever moves freely, but does not shift. Where is the linkage located under the hood and to the transmission and how do you repair or replace it?


there is no linkage there is a cable fron the transmission to steering column nylon gromets on each end break replace shifter cable

Aug 31, 2013 | 2000 Pontiac Montana

1 Answer

High pitch noise from 2006 Pontiac Montana when you reach 80 miles


a few things transmission pump
alternator / water pump / power steering pump.
brake rotor rubbing on dust shield.
u-joint in drive shaft rusty

Jan 27, 2013 | 2006 Pontiac Montana SV6

1 Answer

Power steering pump replacement 2002 pontiac montana


Remove the drive belt, remove the 3 mounting bolts by using a socket ththrough the holes in the drive pulley. Remove the upper intake to give you room, slide off the rubber return hose, remove the pressure line and lift out the pump. Just reverse the process to instill the new pump. And fill with the proper fluid.

Jan 09, 2013 | 2002 Pontiac Montana

1 Answer

2006 pontiac montana dashboard lights not working


2006 Montana, I am trying to remove the kick panel on the passenger side of the dash. I want to rivit a piece of aluninum to it because the valcove tape won't stick to plastic.

Oct 14, 2011 | 2006 Pontiac Montana SV6

2 Answers

How do I remove the steering column cover from a 1994 Pontiac Grand Am? I have all the screws out and the top cover off, but the bottom cover is held on by the steering adjustment lever on the left and...


so your trying to remove the tilt lever. just so you know. it screws into the bracket just like a bolt. so use a pair of pliers or vice grips and turn it and it will unscrew. ya its a tight b----. they don't want it to come off.

Jan 30, 2018 | 1994 Pontiac Grand Am

1 Answer

Locate the tilt wheel lever


SHOULD BE ON STEERING COLUMN CLOSE TO TURN SIGNAL SWITCH LEVER.

Jun 12, 2010 | 2000 Pontiac Grand Am GT

3 Answers

NEED TO KNOW HOW TO CHANGE OUT IGNITION SWITCH ON 1997 PONTIAC FIREBIRD. PURCHASED SWITCH FROM PONTIAC DEALERSHIP WITH NEW KEY. HOW EASY IS IT?


Caution:On models with a Delco Loc 2 or Theftlock audio system be sure the lockout feature is turned off before proceeding

  • Disable the airbag system
  • Remove the tilt lever if equipped
  • Remove the upper and lower steering column covers
Ignition Switch

  • Remove the ignition switch retaining screws
  • Detach the ignition switch from the steering column housing assembly and unplug the electrical connectors
Key Lock Cylinder

  • Turn the key to the run postion
  • Depress the lock button and remove the key lock cylinder

Sep 22, 2009 | 1979 Pontiac Firebird

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

35 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

Marvin
Marvin

Level 3 Expert

85111 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...